Rising Christmas Tree Fidget - Print-in-Place Telescoping Tree, No Supports (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lift it by the top and it rises into a tall tree with baubles; set it down and it sinks back into a little cone.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A print-in-place telescoping Christmas tree: lift it by the top and it rises out of itself into a tall tree with a zigzag hem and baubles; set it down and it sinks back into a little cone. Lips on every section catch, so it never comes apart. A festive sibling of the Rising Ghost and Rising Snowman, and a great stocking filler.
DETAILS
• 66 mm wide, 58 mm tall collapsed and about 130 mm risen, in five sections.
• Prints collapsed in one piece with no supports: the catch lips have 45-degree faces, the top is a cone and the bauble holes have pointed tops. If the sections fuse, raise the clearance to 0.5 mm in the Customizer.
• Bambu Studio: 1 h 13, 32 g.
CUSTOMIZE (OpenSCAD)
Number of sections, width, section height and clearance.