1 / 2
Hose Guides - Garden Hose Guide Spikes to Protect Beds and Borders, Set of 3, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Hose Guides - Garden Hose Guide Spikes to Protect Beds and Borders, Set of 3, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spikes for the corners of beds so the garden hose slides round them instead of flattening your plants.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Spikes that push into the corners of beds and borders so the garden hose slides round them instead of dragging across and flattening your plants. A smooth round post with a flared cap that keeps the hose from riding up, on a strong four-sided spike, with a collar that stops it sinking too deep. Set of three. Print in PETG or ASA for the outdoors.

DETAILS

• 160 mm long, 45 mm post above the ground.

• Prints upside down with no supports: the cap is on the bed, then the post, then the spike tapering to its point.

• Bambu Studio: 2 h 26, 55 g for all 3.

CUSTOMIZE (OpenSCAD)

Post height, spike length and number of guides.

Tagi