1 / 2
NVIDIA DGX Spark front-fan rack shelf (10" 2U, one piece) — zdjęcie 1
1 / 2

NVIDIA DGX Spark front-fan rack shelf (10" 2U, one piece)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

One-piece 2U 10" rack shelf for DGX Spark with two 80mm front fans ducting air into the box. Printed M4 threads.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
41
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
GNU General Public License v3.0

A 2U shelf for the NVIDIA DGX Spark in a 10" DeskPi RackMate T1 rack. Two 80 mm Noctua NF-A8 fans in the front panel push air through a printed duct straight into the Spark's front intake. A foam strip on the duct seals against the box, so the fan air goes into the box and not around it. The Spark slides in from the back and two snap hooks hold it.

The faceplate, duct and tray print as one part, with modelled M4 threads for the fan screws, so no inserts are needed. It fits the rack's rear rails with the matching rear brackets.

- Print: Bambu P1S, 0.4 mm nozzle, PETG. Face down, 250 × 88 × 205 mm.

- Supports: only under the 8 fan-seat pads, from the build plate.

- Time and filament: about 8.5 hours and 320 g with 4 walls, or 7.5 hours and 232 g with 2 walls.

- You need: 2× NF-A8 PWM fans, 2× 80 mm fan guards, 8× M4×35 screws, 5 × 4 mm soft foam strip, and the rear brackets.

Tagi