1 / 2
NVIDIA DGX Spark front-fan rack shelf (10" 2U, one piece) — image 1
1 / 2

NVIDIA DGX Spark front-fan rack shelf (10" 2U, one piece)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

One-piece 2U 10" rack shelf for DGX Spark with two 80mm front fans ducting air into the box. Printed M4 threads.

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
41
Reviews
0

Updated at source:

Model information

Category
Computers
License
GNU General Public License v3.0

A 2U shelf for the NVIDIA DGX Spark in a 10" DeskPi RackMate T1 rack. Two 80 mm Noctua NF-A8 fans in the front panel push air through a printed duct straight into the Spark's front intake. A foam strip on the duct seals against the box, so the fan air goes into the box and not around it. The Spark slides in from the back and two snap hooks hold it.

The faceplate, duct and tray print as one part, with modelled M4 threads for the fan screws, so no inserts are needed. It fits the rack's rear rails with the matching rear brackets.

- Print: Bambu P1S, 0.4 mm nozzle, PETG. Face down, 250 × 88 × 205 mm.

- Supports: only under the 8 fan-seat pads, from the build plate.

- Time and filament: about 8.5 hours and 320 g with 4 walls, or 7.5 hours and 232 g with 2 walls.

- You need: 2× NF-A8 PWM fans, 2× 80 mm fan guards, 8× M4×35 screws, 5 × 4 mm soft foam strip, and the rear brackets.

Tags