16 Wrench Rack, Reversible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Whipped up in Tinkercad when I saw a set of 16 wrench reversible racks going for 35 bucks on amazon. I haven't printed…
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 233
- Wydruki
- 1
- Wyświetlenia
- 997
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Whipped up in Tinkercad when I saw a set of 16 wrench reversible racks going for 35 bucks on amazon.
I haven't printed these yet, and as modeled they will require a large format printer. Each is nearly 300mm long.
Based on a gray tools 94715 wrench rack.
Should print happily without supports. I recommend placing some magnetic tape underneath to increase wrench clearance in your box and keep them from sliding around.
You can always slice them in half with cura and print in pieces, then glue together. Happy wrenching!
Print Settings
Printer Brand:
Ultimaker
Printer:
S5
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
any PLA or PETG
Notes:
For durability and oil resistance, PETG is likely the best choice for this print.
Category: Tool Holders & Boxes