1 / 4
Arturia Minilab MK2 microphone support — zdjęcie 1
1 / 4

Arturia Minilab MK2 microphone support

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Support to put on a microphone stand for the Arturia Minilab MK2

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial

Mount for the Arturia MiniLab MK2 keyboard on a standard 5/8" microphone stand.

The keyboard sits flat on the frame and the central hub screws straight onto the stand's 5/8"

FEATURES - Outer size: 363 x 228 x 30 mm - Keyboard pocket: 355 x 220 mm with 1 mm clearance - Modeled 5/8"-27 UNS thread in the hub, 12 mm deep - Ribbed frame meeting at the centre: light, stiff, little material - Wide flat-topped ribs (16 mm): the keyboard rests on flat surfaces, not edges - Side, front and back lips to hold the keyboard - 45-degree chamfers under the ribs: no supports needed.

ASSEMBLY 1. Print the part. 2. If the thread is too tight, chase it with the stand's thread or add 0.2 mm clearance. 3. Screw the mount onto the mic stand. 4. Place the MiniLab MK2 in the frame.

NOTES - Parametric design: width, depth, wall thickness and thread depth are easy to change. Comment if you want another version, for example a tilted one. - Not affiliated with Arturia. The keyboard name is used only to indicate compatibility.

Tagi