1 / 5
Simple Race Bib Magnets - Pin-Free Bib Holder — zdjęcie 1
1 / 5

Simple Race Bib Magnets - Pin-Free Bib Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple magnetic race bib holders that replace safety pins. No holes in your shirt, quick setup, and reusable.

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
30
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Simple Race Bib Magnets

A basic, reusable magnetic race bib holder designed to replace safety pins. The front and back pieces clamp your race bib to your shirt using magnets, so you do not have to poke holes in technical shirts or deal with pins on race morning.

Features

- Pin-free race bib attachment

- No holes in running shirts or costumes

- Quick to attach and remove

- Reusable for 5Ks, 10Ks, half marathons, obstacle races, and fun runs

- Simple bar design prints quickly and uses little filament

- Designed for 8x3 mm neodymium magnets

Hardware required

- 8x3 mm neodymium magnets

- One front piece and one backing piece per bib attachment point

- Press fit OK, glue to be safe

How to use

1. Put the backing piece behind your shirt.

2. Place your race bib on the front of the shirt.

3. Set the front magnet piece over the bib.

4. The magnets clamp the bib and shirt together.

Printing notes

- Designed around 8x3 mm neodymium magnets.

- Check magnet polarity before gluing; the front and back pieces must attract each other.

- Print with the visible face up for the cleanest finish.

- Test holding strength with your actual bib and shirt before race day.

Safety note

Check that the magnets are securely retained before running. Do not use near pacemakers or other implanted medical devices.

Tagi