1 / 2
Rain Chain Bells - Six Bells to Turn a Downpipe into a Water Feature, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Rain Chain Bells - Six Bells to Turn a Downpipe into a Water Feature, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Six bells for a rain chain: thread them on a chain or cord from the gutter and rain trickles from bell to bell.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A set of six bells that turn a downpipe into a water feature: thread them on a chain or cord hanging from the gutter outlet, with a knot or a stopper bead under each one, and rain trickles from bell to bell instead of rushing down a pipe. Six stopper beads included, and drip notches round each rim. Lovely on a porch, a shed or a summer house; print in PETG or ASA, in copper, bronze or slate grey.

DETAILS

• 60 mm bells, 49 mm tall, 7 mm cord hole.

• Prints with no supports: each bell prints open side down with sides under 45 degrees and the inside ends in a cone up to the cord hole; the beads print flat.

• Bambu Studio: 3 h 5, 97 g for the set.

CUSTOMIZE (OpenSCAD)

Bell diameter, height and cord hole size.

Tagi