Si-Tech Mono Silica Nutrient Bottle – Snap-On Syringe Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-on syringe holder for Si-Tech Mono Silica nutrient bottles. Keeps your dosing syringe organized and within reach.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Si-Tech Mono Silica 16oz Bottle – 5mL Syringe Holder
Keep your nutrient dosing supplies organized with this compact, easy-to-print syringe holder.
Designed specifically for the Si-Tech Mono Silica 16 oz nutrient bottle, this holder snaps securely around the bottle and provides a convenient storage location for a 5 mL dosing syringe.
No more searching for your syringe when it's time to mix nutrients!
Features
Snap-On Design: Attaches directly to the bottle without screws, adhesives, or additional hardware.
Integrated Syringe Holder: Keeps your dosing syringe conveniently accessible.
Easy Installation: Simply snap the ring around the bottle.
Compact Design: Adds minimal bulk without interfering with normal bottle use.
Easy to Print: No supports or infill required.
Compatible Products
AgroMagen Si-Tech Mono Silicic Acid Plant Nutrient
https://www.amazon.com/dp/B0CDQT1Y7C5ml Syringes (approx 13.8mm diameter)
https://www.amazon.com/dp/B07KQM36D3
Designed and tested with the products listed above. Compatibility with other bottles or syringes has not been verified.
Print Settings
Materials: PLA, PETG, or ABS
Layer Height: Tested at 0.16 mm and 0.20 mm
Walls: 4
Infill: Not needed
Supports: None required
Material Recommendations
PETG is the recommended material for this print. Its flexibility makes it well suited for the snap-on design, allowing the collar to flex during installation and removal while reducing the likelihood of cracking.
PLA and ABS may also be used, although PLA is generally more rigid and may be more susceptible to cracking if repeatedly flexed.
As with other functional prints, use properly dried filament. Moisture-contaminated filament can cause poor layer adhesion and brittle finished parts, particularly in snap-fit designs.
Print Tolerances
A properly calibrated printer is recommended to ensure a good fit.
This model uses relatively tight tolerances for the snap-on bottle collar and syringe holder. Dimensional accuracy may vary depending on your printer, filament, and slicer settings.
For best results, verify your printer's dimensional accuracy and flow calibration before printing. Avoid forcing the holder onto the bottle or inserting the syringe if the fit is excessively tight.
Other Bottle or Syringe Sizes
Have a bottle or syringe that doesn't fit this holder? Feel free to send me a message!
I'm happy to create a version to accommodate different bottle or syringe sizes. Just provide the outside dimension or diameter (in mm) of your bottle and/or syringe, and I'll see what I can do.
Notes
Rinse and dry the syringe after use to prevent nutrient residue from accumulating.
This holder is intended for external bottle attachment. Avoid prolonged contact with concentrated nutrient solutions and always follow the manufacturer's handling instructions.