1 / 2
Seedling Cloches - Mini Bell Cloches with Vent and Peg Tabs, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Seedling Cloches - Mini Bell Cloches with Vent and Peg Tabs, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mini bell cloches that protect young plants from frost, wind, slugs and birds, with a vent and peg tabs.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Mini bell cloches to protect young plants from frost, wind, slugs, birds and cats while they get going: lettuce, brassicas, courgettes, beans and new transplants. A vent at the top stops them cooking on sunny days, and three pegging tabs round the rim let you pin them down with a wire hoop or tent peg. Print in clear or translucent PETG so the light gets through.

DETAILS

• 90 mm rim, 86 mm tall with the vent knob, 12 mm vent; two per plate.

• Prints with no supports: each bell prints open side down with sides well under 45 degrees, and the inside ends in a cone up to the vent.

• Bambu Studio: 2 h 17, 84 g for the set.

CUSTOMIZE (OpenSCAD)

Rim diameter, height and vent size.

Tagi