Cable Tie Mounts - 12 Screw-On Anchors for Zip Ties, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw-on mounts that anchor cable ties to walls, desks and beams, for tidy cables, hoses and lights.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Screw-on mounts that anchor cable ties (zip ties) to a wall, the underside of a desk, a shed beam, a caravan or a car boot, for tidying cables, hoses, lights and wiring looms. A countersunk screw hole in the middle and a tunnel on either side of it, so the tie can go through either way. Twelve per plate; set the tie width for your ties.
DETAILS
• 20 mm square, 7 mm tall; for ties up to 4.8 mm wide and 4 mm screws.
• Prints flat with no supports: each mount is a pad with tunnels that have pointed 45-degree roofs.
• Bambu Studio: 53 min, 16 g for the set.
CUSTOMIZE (OpenSCAD)
Cable tie width and screw size.