Cable Tie Mounts - 12 Screw-On Anchors for Zip Ties, No Supports (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screw-on mounts that anchor cable ties to walls, desks and beams, for tidy cables, hoses and lights.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Screw-on mounts that anchor cable ties (zip ties) to a wall, the underside of a desk, a shed beam, a caravan or a car boot, for tidying cables, hoses, lights and wiring looms. A countersunk screw hole in the middle and a tunnel on either side of it, so the tie can go through either way. Twelve per plate; set the tie width for your ties.
DETAILS
• 20 mm square, 7 mm tall; for ties up to 4.8 mm wide and 4 mm screws.
• Prints flat with no supports: each mount is a pad with tunnels that have pointed 45-degree roofs.
• Bambu Studio: 53 min, 16 g for the set.
CUSTOMIZE (OpenSCAD)
Cable tie width and screw size.