Tool File Handles - Three Replacement Handles for Files and Rasps, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement handles for files, rasps and scrapers, with a fluted grip and a neck for a copper-pipe ferrule.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement handles for files, rasps, chisels and scrapers that came without one or have split their old handle. A swelling barrel grip with shallow flutes, and a neck that takes a short offcut of 22 mm copper pipe as a ferrule so the handle never splits. Warm the tang with a heat gun and push it into the tapered hole. Three sizes per plate. Print in PETG or PLA with 4 walls and 40% infill.
DETAILS
• 90, 110 and 130 mm long; 28, 32 and 36 mm thick.
• Prints upright with no supports: each handle stands on its chamfered end, swells out gently and narrows again, and the tang hole is open at the top.
• Bambu Studio: 2 h 44, 73 g for the set.
CUSTOMIZE (OpenSCAD)
Tang size and neck diameter.