Tool File Handles - Three Replacement Handles for Files and Rasps, No Supports (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement handles for files, rasps and scrapers, with a fluted grip and a neck for a copper-pipe ferrule.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement handles for files, rasps, chisels and scrapers that came without one or have split their old handle. A swelling barrel grip with shallow flutes, and a neck that takes a short offcut of 22 mm copper pipe as a ferrule so the handle never splits. Warm the tang with a heat gun and push it into the tapered hole. Three sizes per plate. Print in PETG or PLA with 4 walls and 40% infill.
DETAILS
• 90, 110 and 130 mm long; 28, 32 and 36 mm thick.
• Prints upright with no supports: each handle stands on its chamfered end, swells out gently and narrows again, and the tang hole is open at the top.
• Bambu Studio: 2 h 44, 73 g for the set.
CUSTOMIZE (OpenSCAD)
Tang size and neck diameter.