BMW E38 Parking Brake Lever
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the parking brake release lever on your BMW.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
With this you no longer have to be scared to touch the parking brake handle in your BMW E38 7 series. It has been separated to optimize for 3d printing. I recommend printing in ABS (or better) as many of the interior parts in these cars are ABS and will be subjected to high temps. The two pieces should be solvent welded together with ABS cement (or better) available from your local hardware store, I got mine from Home Depot. The ABS cement is included in the pictures. An acid brush was also used to apply the cement, it is more precise than the large brush in the can. The step files have been provided for anyone who wants to remix this design.
A .3mf that includes a cup with the "P" symbol on it and the supports is in the files section. I also printed with 8 perimeters to ensure that the cable interface and cup, would have the necessary strength.
The blank cup can be modified by right clicking the model in slicer and "add Part-->SVG" then you can add any design you have prepared as a .svg file. Enjoy!
I hope this helps your build!!