1 / 2
Tape Roll Wall Rack - Wall Rack for Duct, Masking and Electrical Tape, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Tape Roll Wall Rack - Wall Rack for Duct, Masking and Electrical Tape, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wall rack with two big pegs for duct and masking tape and three small pegs for electrical tape.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
11
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A wall rack for the workshop, garage, craft room or office that keeps your tape rolls where you can see them: two big pegs for duct tape, masking tape, gaffer and parcel tape (76 mm cores), and a top row of three small pegs for electrical and washi tape. Each peg has a lip so the rolls do not slide off. Screw it to the wall through the four countersunk holes.

DETAILS

• 190 x 180 mm; 70 mm pegs 52 mm long, 16 mm small pegs.

• Prints flat with no supports: the back plate lies flat and the pegs stand straight up, with 45-degree lips.

• Bambu Studio: 3 h 38, 137 g.

CUSTOMIZE (OpenSCAD)

Big peg diameter and length, and small peg diameter.

Tagi