1 / 2
Chisel Edge Guards - Six Slip-On Caps for 6 to 25 mm Chisels, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Chisel Edge Guards - Six Slip-On Caps for 6 to 25 mm Chisels, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slip-on caps that protect chisel edges (and fingers) in the tool roll. Six sizes, each marked.

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
18
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Slip-on caps that protect the cutting edges of your chisels in the tool roll, drawer or box, and protect your fingers from them. Six sizes for the common 6, 10, 12, 16, 20 and 25 mm chisels, each marked with its size; change the sizes and blade thickness in the Customizer to suit your set. Also fit carving gouges, scrapers and plane irons of the same width.

DETAILS

• For blades 6 to 25 mm wide and up to 5 mm thick, 28 mm deep.

• Prints with no supports: each guard is an open-topped pocket standing on its closed end.

• Bambu Studio: 39 min, 17 g for the set.

CUSTOMIZE (OpenSCAD)

Blade widths, blade thickness and pocket depth.

Tagi