FlexHook – Spring-Clamp Headphone Hanger (10–61 mm desks, no screws)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimal one-piece headphone hanger with a built-in leaf spring – from 10 to 61 mm, no screws, no supports.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 1
- Wyświetlenia
- 28
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't find a headphone hanger that simply clamps onto the desk edge and still sits firmly when the desktop isn't evenly thick – so I designed FlexHook.
How it works A leaf spring printed into the lower jaw pushes up against the underside of the desk and takes up ~3.6 mm of thickness variation. On thicker spots the spring bottoms out on the rigid arm, so the weight of the headphones goes through the solid body, not the spring.
Pick your size Measure your desk with a caliper and choose the file whose range contains your thickness. Each file covers 3 mm (+0.6 mm overlap to the next size). The range is embossed on the underside of the hook.