FlexHook – Spring-Clamp Headphone Hanger (10–61 mm desks, no screws)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimal one-piece headphone hanger with a built-in leaf spring – from 10 to 61 mm, no screws, no supports.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 1
- Views
- 30
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't find a headphone hanger that simply clamps onto the desk edge and still sits firmly when the desktop isn't evenly thick – so I designed FlexHook.
How it works A leaf spring printed into the lower jaw pushes up against the underside of the desk and takes up ~3.6 mm of thickness variation. On thicker spots the spring bottoms out on the rigid arm, so the weight of the headphones goes through the solid body, not the spring.
Pick your size Measure your desk with a caliper and choose the file whose range contains your thickness. Each file covers 3 mm (+0.6 mm overlap to the next size). The range is embossed on the underside of the hook.