Quick Swap Buffer Tube Stock.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick swap buffer tube stock.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a buffer tube stock on my crush. I also wanted to be able to remove it easily. What more is there to say?
Tolerances were a bit tight for me on the quick release buttons but that's probably cause my extrusion multiplier hasn't been tuned. It fits on Crush picatinny. I am not sure if it fits on other picatinny though. Print flat side down with the tube horizontal to the bed and no supports. I printed mine using 5 walls 20% fill. The more compatibility version allows more of the 5 positions to be used with certain stocks. It may or may not increase "stock wiggle" on more extended positions. That particular version is untested.
You will need the quick swap buttons from Chance's crush files, two pen springs, and two m3x30 screws.
Created in Fusion 360 with a simple boolean operation.