Support de bureau pour /Sony SRS-XB100/ Desktop Speaker Stand Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support à double évent bass-reflex / Dual bass reflex port stand
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 42
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
MAJ 2026-11-02
Voir les 5 dernières photos
-Modification du modèle (rajout d'un repère sur la face avant). Positionnez l'enceinte correctement sur son support puis rajouter un repère avec un feutre sur l'enceinte en face au repère, ça facilitera le positionnement si comme moi vous la déplacez souvent
-Ajout d'un stl avec une version alternative des pieds basé sur le découplage qui devrait permettre une meilleure isolation (à vérifier, non testé).
FR
Merci à Ghifari Arifianto pour la modélisation du Sony SRS-XB100 en plus au format SolidWorks (tu m'as fait gagner du temps de prise de mesure)
https://grabcad.com/library/wireless-bluetooth-speaker-sony-srs-xb100-1
Imprimer les pieds en TPU/TPE
Les pieds ne sont pas obligatoires si ça ne fait pas vibrer le bureau
En tout, vous utiliserez 2 g de support. Voir photo pour déterminer une zone d'interdiction des supports.
Une photo du dessous de la pièce imprimé permet de voir que les supports était inutiles pour cette zone.
Pour le support de bureau 3 périmètres 15 ou 20 % de remplissage en nid d'abeille
Voilà.
EN
Updated 2 November 2026
View the last 5 photos
- Design modification (addition of a mark on the front panel). Position the speaker correctly on its stand, then add a mark with a felt-tip pen on the speaker opposite the mark; this will make positioning easier if, like me, you move it around often
-Added an STL file with an alternative version of the feet based on decoupling, which should provide better isolation (to be verified; not yet tested).
Thanks to Ghifari Arifianto for modelling the Sony SRS-XB100 in SolidWorks format as well (you saved me time taking measurements)
https://grabcad.com/library/wireless-bluetooth-speaker-sony-srs-xb100-1
Print the feet in TPU/TPE
The feet aren’t essential if the speaker doesn’t cause the desk to vibrate
In total, you’ll use 2 g of support material. See the photo to identify the area where support material should not be used.
A photo of the underside of the printed part shows that supports were unnecessary in this area.
For the desk stand, use 3 perimeter layers with 15 or 20 per cent honeycomb infill.
Voilà.
Translated with DeepL.com (free version)