Liczymy pasujące modele…
I split the print up into pieces that fit on a Ender 3 Max at scale of 3%. The model acts funny in cura and for some reason I can not fix that but it does print you just have to do some steps when you first import into cura. Step 1. Once…
model exported from Oldschool RuneScape printed in esun pla+ with tree supports
if you want to use these commercially I recommend checking out Jagex's post on it: https://www.jagex.com/en-GB/terms/fancontentpolicy
I exported the obj of my character wearing the helmet using the Runelite Model Exporter plugin . After chopping off the rest of my character, I had to make a bunch of edits to the mesh so it could be solid (video games don't require…
Hey all! I've been wanting to print a lifesize wearable Slayer helm from Old School Runescape for some time now but I have only been able to find paid models that I'm not a huge fan of. So I decided to create my own!! This is scaled to my…
I don't like attaching the microphone-speaker to the antenna of the radio when it's not in use. The antenna is for transmission and not for mounting things. That's why I designed a holder that rests on the two holes on the back of the…
I exported the party hat model using the Model Exporter Runelite plugin. I loaded it into Fusion 360, cleaned up the mesh, then gave it thickness. I included 3 stls: partyhat-game-accurate.stl - This is the model just after cleaning and…
I want to make an rs3 version of this too at somepoint. The Rune Scimitar is an iconic weapon from Runescape. Haven't printed this yet, so unsure how it comes out. I know there is someone else's model on here too. There are slight…
A teleport tablet from oldschool runescape. I designed this in fusion 360 from scratch. The different colored sections are separated by 0.6mm (3 layers at 0.2mm layer height) so you can insert filament swap gcodes at the layer changes. I…
This is… the rear SRS cover for the W203 Sedan! This model is the remaster of the design created by me, based on the original Mercedes part! Although this was created with a sedan part, it could work on the Station or the Coupe. This…
its not the prettiest mount but it works really good, i used it for almost an year now and its been solid. i sticked it with 3M VHB 5952 1mm thick
This is… the rear SRS cover for the W203 Sedan! This model is the remaster of the original design by Mercedes-Benz, with a few improvements! Although this was created with a sedan part, it could work on the Station or the Coupe. This…
Speakers produce much better sound when they are facing towards the listeners, so I created this simple angled stand for my SRS-XB13.
Models are of the standard and corrupted version of the Voidwaker sword from the game Old School Runescape. If you wish to create a life-size model, you can scale it up to about 615%, which should result in approximately 80cm in length…
I took the D2 and modified half it's two sides to create this beautiful serenely 4 unique value-yielding randomizer. I think that technically makes it a 2-sided D4. The suggestion came from Twisted_haywire so don't blame me for your…
OSRS Ironman helmet gamefile editted so it has a stand. Print Settings Printer brand: Prusa Printer: i3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 20%
A simple stand for the Sony SRS-XB41 mobile speaker. I made this a long time ago, might as well upload it. Printing it is pretty straightforward. It should have a high layer count, otherwise you might get holes inside of the bottom. There…
Here is Osrs Christmas cracker fan art, This super cute print in place model needs no supports just pick your colour and print. If your a fan of RuneScape then you have to have this The first model is the classic Christmas cracker from…
Came out lovely but took a lot of tinkering with slicer settings and supports. I used organic supports with a minimum width of 4 and painted extra supports on the tips of the tail and the teeth(!!). Very important to make sure there's no…
Hello All! Here is a OSRS Dragon Warhammer model that I created. This model is not an exact replica of the in game Warhammer but a homage to the item that is easier to print. I created this model in many pieces that all link together with…
Hello there, Custom bolt knobs for SRS in Long, medium and short variants. Let me know what can be improved or what shape you'd like to see. My personal fav is Medium v2 - for SBA M140 and M170 springs, and for Rapax 3j+ which i'm using…
BMW E36 steering wheel SRS cover / emblem
No supports or brim needed. I reduced the gem in slicer to fit. 97% was perfect after painting both pieces. This was a rushed project for a last minute Halloween costume and could certainly be improved. I designed it to resemble the…
Osrs Noon pet on a stand small stand. Pulled from OSRS using Model Exporter plugin for Runelight and repaired in meshmixer. Its not perfect but chitubox fixed a lot of holes for printing it as a mini. Ymmv on FDM
The default OSRS character model, with a sword and shield. Now you too can own your own bot (but this time you'll follow the rules!) Category: Toys & Games
This is a replacement sprinkler head cap for one of my (old and now discontinued) Hunter SRS based irrigation system sprinkler heads. Cap broke and I decided to try replacing the failed part with a 3D printed one instead digging out and…
an osrs chess set print the tip of the demon tail separately printed in 5% cubic infill with organic supports
Was hard to keep the ears when removing the supports. Printed at 50% on 0.050mm using 3DJake EcoResin light gray.
OSRS Midnight Pet on baseplate Pulled from OSRS using Model Exporter plugin for Runelight and repaired in meshmixer. Its not perfect but chitubox fixed
UPDATE: I believe I messed up the tolerances so they should be adjusted properly now. Made some croc charms of the Old School Rune Scape runes. made a few of them so far as you see in the pictures. Saw an instagram post of someone that…
Updated 9/19/24 to include complete project files and colors/descriptions
My boyfriend wanted a small party hat as keychain so i made him one! Printed mine with the size 16mm wide
Printed using Aquila pro 0.15m layer height Auto supports with some extras added which it missed. Raft used Defender was glued as not attached (didn't realise until made/printed)
Oldschool Runscape Med Helm Created using intellectual property belonging to Jagex Limited under the terms of Jagex's Fan Content Policy. This content is not endorsed by or affiliated with Jagex.
I was looking for a chin mount for my DJI action cam for my dirtbike 5SRS Oneal helmet but couldn't find one I didn't want to spend a bunch of money on a 25 cent print. The one I've tested has been printed out of PLA with 4 walls 20%…
Halterung für Sepura Lautsprecher Mikrofon sRSM 300-01169 zur Befestigung an einer Wetech Ladeerhaltung mit den vorhanden Schrauben. Lochabstand der Befestigungsschrauben 40mm Variante für links und rechts Gedruckt mit TPU 95A. So…
This is a cleaned up model of the Bloodhound from OSRS. I printed via Chitubox on my Mars 2 with transparent resin. YMMV
This case uses 5 mm x 1,5 mm Magnet (16 pieces) like you get from the cigarette papers like Gizeh. Pause the print to insert them in the lid and case. External Perimeters max 0.44
Ranged icon from osrs. Can be printed with one extruder. Does not need MMU or AMS A good idea is to print this out as a “token” when you get 99 in this skill. Let me know if you want me to upload a version of this with embedded magnets :)…
An adapter for mounting a Sony SRS-XB32 Bluetooth Speaker on a standard Tripod Mount
This is a cleaning rod guide alignment spacer that works for the Desert Tech SRS rifle that helps keep the cleaning rod aligned during cleaning to prevent damaging the inside of the rifle barrel. Remove the butt plate per the factory…
6 Plates total. I printed it on P1S. I would slice and setup for your printer. (1) Keychain (1) Solid model painted for AMS (1) Solid model painted for AMS, and hole for pencil. (3) Plates of parts for Non-AMS that can be assembled,…
how many times do i gotta teach you this lesson old man
This is ripped right from the games files this is an unprinted model so good luck with printing it. I tried to fix it best I could with what little time and skills and tools I have. I have included the raw obj file so if you want to fix…
Hello there. Small improvement for your SRS here :) Dedicated for small bubble level (bought from Taiwangun.com - https://www.taiwangun.com/scopes/riflescope-bubble-level-for-rings-pcs ) as it it is compatibile with few scope mounts, and…
Extracted the file directly from Old school RuneScape. Edit: It's very thin is you print it on 100% so be very careful. Supports are needed.
Magazine holder for SRS Silverback, designed for 40mm belt. Also available in hex version. In the near future, Im going to upgrade some thing like better inserting and universal belt holder.
We love the little SONY SRS-XB100 bluetooth speaker, so I made this simple shelf to let it sit on the headboard of our IKEA bed. The thickness of the board is 34mm.
Slayer icon from osrs. A good idea is to print this out as a “token” when you get 99 in this skill. Let me know if you want me to upload a version of this with embedded magnets :) Original model made by N_DuX_M
Hey all! Thanks for checking out my design. This is a pen holder designed to emulate the appearance of a Mind Rune from the game Old School RuneScape (OSRS). I built this from scratch using Fusion 360 and Inkscape. OSRS is my go-to…
Old School Runescape's Night Mare Staff. Working on cleaning up the defects in my first design
Needs Tree supports.
Farming icon from osrs. Can be printed with one extruder. Does not need MMU or AMS A good idea is to print this out as a “token” when you get 99 in this skill. Let me know if you want me to upload a version of this with embedded magnets…
Great Olmic Statues can be found on Mount Quidamortem depicting the Great Olm.
Made this fun osrs themed valentine, first time designing a multi coloured print. Included print files have colour changes added! Enjoy and happy valentines day!
This is my Sony Speaker Holder to mount it to my bicycle. So i can hear music when riding in the forrest or around the lake. I publish here also the Freecad files, so you can adapt it to your bike frame. Enjoy your music while cycling.…
Pixelated model of the fishing skill emblem in OSRS. Each “pixel” is 3mmx3mmx0.5mm, and the total model is 72mmx69mmx2mm. It is comprised of 4 layers to allow for multicolor printing without any interlayer color changes. There are 2…
Mining icon from osrs. A good idea is to print this out as a “token” when you get 99 in this skill. Let me know if you want me to upload a version of this with embedded magnets :) Original model made by N_DuX_M - I have permission to set…
petg remplissage 30% les 2 montants sont realisé avec un vieux canon aeg recouper
This is a complete overhaul of my original OSRS skill icons 3d model project. https://www.thingiverse.com/thing:6834722 . This was made by exporting the image information to a json file using a python script i wrote. the json contained a…
MAJ 2026-11-02 Voir les 5 dernières photos -Modification du modèle (rajout d'un repère sur la face avant). Positionnez l'enceinte correctement sur son support puis rajouter un repère avec un feutre sur l'enceinte en face au repère, ça…
As a long time Old School Runescape player, I finally got a fire cape. In celebration, I created this 3D printable Jad LED lamp that casts a nice ambient glow, perfect for any RuneScape fans desk. The design features a Magma textured base…
I made a box to mount on a separate 24V power supply Until now, my 3d printer has been given 12V to the heat bed, so it takes approx. 20 minutes to heat it up to 100 C (while covering it with some insulation on top). After that it…
This model of the classic Dragon Dagger with poison effect from Old School RuneScape is meant to be fairly life size and game accurate while also being optimized for easy 3D printing. For the handle, I simply printed it vertically, with…
Prints okay in PLA, but very stiff and tight fit; might need a little sanding or other postproc. Probably better in PETG as it has a bit more flex, but untested. Print as oriented. Printer used: Elegoo Neptune 4 Plus Walls: 2 Infill: 10%…
This model of the classic Dragon Scimitar from Old School RuneScape is meant to be fairly life size and game accurate while also being optimized for easy-ish 3D printing. For the handle, I simply printed it on its side. For the blade, I…
3D models based on the cape icons from OSRS. The models were created by extracting the pixel information from the images using a python script i wrote. the json structure includes a 2d array of the hex codes of the pixels in the image and…
3D models based on the Rune icons from OSRS. The models were created by extracting the pixel information from the images using a python script i wrote. the json structure includes a 2d array of the hex codes of the pixels in the image and…
This is my Sony Speaker Holder to mount it to my bicycle. So i can hear music when riding in the forrest or around the lake. I publish here also the Freecad files, so you can adapt it to your bike frame. Enjoy your music while cycling.…
Keychaing of legendary Fire cape from the amazing MMORPG, Runescape https://oldschool.runescape.wiki/w/Fire_cape
Mining icon from osrs. A good idea is to print this out as a “token” when you get 99 in this skill. Let me know if you want me to upload a version of this with embedded magnets :) Original model made by N_DuX_M - I have permission to set…
petg remplissage 30% les 2 montants sont realisé avec un vieux canon aeg recouper
I designed this model for my speaker (Sony SRS-XB33) as a shower holder. I just thought I could share this model with the public, as you have the same speaker. When you are inserting your speaker, use extreme caution because it is very…
Here is Osrs Christmas cracker fan art, This super cute print in place model needs no supports just pick your colour and print. If your a fan of RuneScape then you have to have this The first model is the classic Christmas cracker from…
A new top sticker for the sony remote to replace the old one, scratched and warped after many years of service. I printed it in pla, 0.08mm layer, with a 0.4mm nozzle. With 0.2mm layers, it wasn't as smooth and precise. I failed to print…
Sony SRS-XB23 wireless speakers are famous for their high-quality sound, but their big drawback is directionality. When placed on a desk, the sound does not travel in a straight line to the ears. This stand solves this problem . When you…
I had to service my suspension - so I created this part and some "just for fun" stress analysis. Perhabs someone can use it. I printed it in PET-G, but I guess ABS will work too. Category: Hand Tools
This is a monitor mount for a srs-xb12 from sony. All port are reachable. Comment for suggestions.
Gridfinity Box for Sony SRS-X11 Bluetooth Speaker This Gridfinity-compatible box is designed to neatly store and protect a Sony SRS-X11 Bluetooth speaker , keeping it secure, organised, and easy to access. The internal cavity is sized to…
The files include: - Assembled and pre-separated variant - Bambu Studio Project and GCODE files - Pre-separated into 2 keyed parts for easy printing and assembly - Variant parts with a 3mm curved channel cut along the blade and handle for…
The models include: - Assembled and Pre-separated variations - Open bottom and closed bottom variations - Bambu Studio Project and GCODE with full color data - Can fit over sized 15 feet inside at default scale Be warned: these are quite…
Sony Bluetooth speaker points straight up, unfortunately that's not where my ears are. This little reflector cone pops on the top and uses a parabolic reflector to redirect the sound outwards instead of upwards.
100% Infill for Clip & Lock 30-50% infill on Extender & reorient Extender to be Flat/Top shelf side down.
The speaker is upside down so that the buttons are still accessible.
I've designed a replacement foot for the missing one on my speaker. Printed with PLA and it is a snug fit, but for best result I suggest using TPU and double sided tape.
I designed this model for my speaker (Sony SRS-XB33) as a shower holder. I just thought I could share this model with the public, as you have the same speaker. When you are inserting your speaker, use extreme caution because it is very…
This socket is specifically designed to work with SrSuntour forks (for top cap removal) and a 1/2" wrench.
