OSRS party hat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Party hat model exported from the game and modified for printability
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 235
- Wydruki
- 2
- Wyświetlenia
- 1003
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I exported the party hat model using the Model Exporter Runelite plugin. I loaded it into Fusion 360, cleaned up the mesh, then gave it thickness.
I included 3 stls:
- partyhat-game-accurate.stl - This is the model just after cleaning and giving it thickness, the base is not flat so it would be rather difficult to print
- partyhat-adjusted.stl - I modified the above version to have a flat base to print from
- partyhat-adjusted-thicker.stl - Same as the above but twice as thick (6mm), if you are going to scale it down, I would recommend this one
At 100% scale, the "hat brim" is ~195mm front to back and ~173mm side to side. Keep in mind that several of the points are angled outward so that may impact print volume.
I would recommend increasing the parameter count until there is no infill and printing with a brim. I didn't print a head-sized version but the one in the picture is the thicker version at 25% scale. I printed it on a Prusa Mk4 in Prusa azure blue PLA using the 0.2mm layer height structural input shaper profile.