OSRS party hat
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Party hat model exported from the game and modified for printability
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 235
- Makes
- 2
- Views
- 1,003
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
I exported the party hat model using the Model Exporter Runelite plugin. I loaded it into Fusion 360, cleaned up the mesh, then gave it thickness.
I included 3 stls:
- partyhat-game-accurate.stl - This is the model just after cleaning and giving it thickness, the base is not flat so it would be rather difficult to print
- partyhat-adjusted.stl - I modified the above version to have a flat base to print from
- partyhat-adjusted-thicker.stl - Same as the above but twice as thick (6mm), if you are going to scale it down, I would recommend this one
At 100% scale, the "hat brim" is ~195mm front to back and ~173mm side to side. Keep in mind that several of the points are angled outward so that may impact print volume.
I would recommend increasing the parameter count until there is no infill and printing with a brim. I didn't print a head-sized version but the one in the picture is the thicker version at 25% scale. I printed it on a Prusa Mk4 in Prusa azure blue PLA using the 0.2mm layer height structural input shaper profile.