OSRS Dragon Scimitar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Old School RuneScape Dragon Scimitar for easy 3D printing. Great for renaissance fair cosplay.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model of the classic Dragon Scimitar from Old School RuneScape is meant to be fairly life size and game accurate while also being optimized for easy-ish 3D printing.
For the handle, I simply printed it on its side.
For the blade, I used my slicer's Cut tool to print pieces that fit on my bed plate- you could print one slice at a time on their sides, or print all the slices vertically with supports.
I found it helps to use the Cut tool's "Add Connectors" options and add dowel connectors or snap connectors, even just to guide the blade pieces together while I superglued them.
And then finally, the blade fits into the handle with a friction fit, but if you're going to walk around with it at the Ren Faire like I did then I would also recommend super gluing the blade into the handle just for good measure.
If you have any questions, hit me up on YouTube comments or Instagram DMs!
Created using intellectual property belonging to Jagex Limited under the terms of Jagex's Fan Content Policy. This content is not endorsed by or affiliated with Jagex.