Christmas Tree Phone and Tablet Stand - Snowflake Fretwork

A festive desk stand for your phone or tablet, free. A decorated Christmas tree leans back at 65 degrees and holds the device. It stands in a red gift-box base with a gold ribbon. The cable goes down through a slot in the ledge, so you can charge while the device is on the stand.

WHAT YOU GET: Tree back plate, 149 x 172 mm: five tiers with scalloped branch tips, snow bands, seven fretwork windows with snowflakes, gold bead garlands, red, gold and white baubles and a faceted gold star on top. Gift-box base: a front lip, a 14.5 mm deep ledge and a 65 degree socket for the tree, with a curved rear brace with four star-shaped windows and a gold ribbon band. Cable slot: a 14 x 7 mm slot in the ledge under the charging port, with the cable coming out at the back. Fits phones and tablets up to 12 mm thick, including most cases. Assembled size about 149 x 100 x 172 mm.

COLOURS: The 3MF uses 4 colours (green, white, red, gold) for multi-material printers. NO SUPPORTS: the tree prints flat, face up, and the base prints on its side, so every feature of its profile is a straight vertical wall.

PRINT SETTINGS: Tree flat, face up, 0.2 mm layers (0.12-0.16 for crisper snowflakes), 3 perimeters, 15 percent infill. Base on its side, 0.2 mm layers, 3 perimeters, 15 percent infill. Assembly: slide the tree's tab down into the 65 degree socket, a snug press fit with 0.2 mm clearance each side. Add a drop of glue if you want it permanent. Route the cable down the slot and out of the channel at the back before you put the device in. Files: one STL per colour part, a combined STL and a 4-colour 3MF. NOTE: Not yet print-tested by me - checked for manifold geometry, overhangs and fit in Blender. Designed with Python scripts in Blender with the help of an AI assistant; no third-party meshes.