Card Scanner Box – Phone TCG Scanning Stand for Pokémon, One Piece, Yu-Gi-Oh! & MTG
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scan a stack of trading cards with your phone: slide each card down the funnel, scan, repeat. Folds into a closed box.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 441
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Standard Digital File License
Scan a whole stack of trading cards with your phone
I built my own scanner box because getting the card tray out of my old one was a pain. Here you just push the tray out from the back. I also wanted something that folds into a closed box, and a steeper slide: on my old box it wasn't steep enough to scan properly.
How it works
Phone on the plate, camera over the window.
Slide a card down the funnel. It lands on the pile right under the camera: scan, next card.
Made for my apps Eyevo (Pokémon, eyevotcg.com), Haki (One Piece) and YuScan (Yu-Gi-Oh!). Works with any scanner app and any standard-size card, sleeved or not.
Versions
Tray: slide-out (push it out through the back) or top-loading (lift it out).
Stand: two parts (the plate becomes the lid and everything folds into a closed box) or one piece (stays set up).
0.4 mm nozzle, 0.2 mm layers, PLA. No supports, screws or glue.
STLs are in print orientation. The 3MFs are ready Bambu Studio projects for the P1S, one per version (2 plates each).
Infill: base 10% gyroid (25% under the slide), tray 15%, plate and one-piece stand 20%, mast 40% with 4 walls.
Base + tray ~230 g, ~5 h. Stand ~100 g, ~2.5-3 h.
Closed 88 × 190 × 77 mm, set up 173 mm tall. Phones up to 6.9", about 120 cards in the tray.