1 / 2
Welly Boot Rack - Wall Rack That Dries a Pair of Wellies Upside Down, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Welly Boot Rack - Wall Rack That Dries a Pair of Wellies Upside Down, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hangs a pair of wellies upside down on two angled pegs, so they drain, dry inside and nothing crawls in.

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
11
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A wall rack that holds a pair of wellies upside down on two angled pegs, so they drain and dry inside and nothing crawls in. For the porch, utility room, shed or by the back door; also dries waders, walking boots and kids' boots. Print one per pair, in PETG or ASA, with 4 walls, and fix it with two countersunk screws.

DETAILS

• 190 x 90 mm plate, two 26 mm pegs 140 mm long at 30 degrees, 130 mm apart.

• Prints with no supports: the wall plate lies flat and the pegs lean up from it at 30 degrees.

• Bambu Studio: 2 h 56, 100 g for one rack.

CUSTOMIZE (OpenSCAD)

Peg spacing, length and diameter.

Tagi