Welly Boot Rack - Wall Rack That Dries a Pair of Wellies Upside Down, No Supports (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hangs a pair of wellies upside down on two angled pegs, so they drain, dry inside and nothing crawls in.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 11
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A wall rack that holds a pair of wellies upside down on two angled pegs, so they drain and dry inside and nothing crawls in. For the porch, utility room, shed or by the back door; also dries waders, walking boots and kids' boots. Print one per pair, in PETG or ASA, with 4 walls, and fix it with two countersunk screws.
DETAILS
• 190 x 90 mm plate, two 26 mm pegs 140 mm long at 30 degrees, 130 mm apart.
• Prints with no supports: the wall plate lies flat and the pegs lean up from it at 30 degrees.
• Bambu Studio: 2 h 56, 100 g for one rack.
CUSTOMIZE (OpenSCAD)
Peg spacing, length and diameter.