Tarp Clips - Self-Locking Clips That Grip a Tarp Anywhere, No Eyelets Needed, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Grip a tarp, groundsheet or shade net anywhere along its edge: a peg wedges the fabric into a keyhole slot.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Grip a tarp, groundsheet, shade net, pool cover or banner anywhere along its edge, no eyelet needed. Lay the tarp over the clip, push the peg down through it into the wide end of the keyhole slot, then pull: the peg and the wrapped fabric wedge into the narrow end and lock tighter the harder it pulls. Tie a guy line, bungee or cable tie through the hole at the end. Four clips and four pegs; print in PETG or ASA for outdoors.
DETAILS
• 64 x 32 mm clips, 8 mm thick, 13 mm pegs.
• Prints with no supports: the clips lie flat with chamfered edges, and each peg stands on its head.
• Bambu Studio: 1 h 2, 25 g for the set.
CUSTOMIZE (OpenSCAD)
Number of clips, peg diameter and clip thickness.