Self-Watering Pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A self-watering pot with 20 softly twisted waves and a clean top band.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Standard Digital File License
A self-watering pot with 20 softly twisted waves and a clean top band. The inner pot hangs flush on a hidden 45-degree seat, its funnel floor leads into a wicking column (grid bottom + 8 slots) that pulls water up from the reservoir, and a rear fill tube reaches the bottom. A float with an indicator knob pops up above the rim when there is water and sinks out of sight when it is time to refill; a 6 mm overflow at 40 mm makes overwatering impossible. All three parts print without supports in PETG (the float prints upright with a sealed air chamber). Nothing to buy - just soil and a plant up to ~12 cm pot.
Parts
Self-Watering Pot - zbiornik bezbajzlu.stl x 1
Self-Watering Pot - wklad bezbajzlu.stl x 1
Self-Watering Pot - plywak bezbajzlu.stl x 1
Print settings
Bambu Lab A1, 0.4 nozzle, PETG, 0.20 mm layer
No supports needed
Full set: 9 h 49 min, 247 g