1 / 1
Lightweight Honeycomb Utensil Holder — zdjęcie 1

Lightweight Honeycomb Utensil Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A lightweight remix of the original honeycomb utensil holder, resized to 100 × 150 mm with a redesigned honeycomb draina

Ocena
0 / 5
Polubienia
0
Pobrania
14
Wydruki
0
Wyświetlenia
47
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Share Alike

Lightweight Honeycomb Utensil Holder with Drainage Bottom

This is a compact, lightweight remix of the original honeycomb utensil holder, redesigned for improved drainage and everyday kitchen use.

The goal was to create a ventilated holder for chopsticks, spoons, and other utensils while reducing material usage and maintaining the original honeycomb aesthetic.

Key Features

  • Compact design: 100 mm diameter × 150 mm height.

  • Honeycomb side walls: Open structure for improved airflow and ventilation.

  • Honeycomb drainage bottom: Allows excess water to drain directly through the bottom.

  • Lightweight construction: Reduced side wall thickness to save filament.

  • Open-top design: Easy access to frequently used kitchen utensils.

Dimensions

Parameter

Specification

Outer diameter

100 mm

Overall height

150 mm

Side wall

Lightweight honeycomb structure

Bottom

Small-cell honeycomb drainage structure

Estimated PETG material weight

Approximately 47.4 g

The estimated weight is based on the model's solid volume and material density. Actual filament consumption may vary depending on slicer settings.

Suggested Print Settings

  • Material: PETG recommended; PLA may also be suitable

  • Layer height: 0.2 mm

  • Nozzle diameter: 0.4 mm

  • Wall loops: 3–4

  • Infill: 15–25%, if applicable

  • Print orientation: Upright, with the bottom on the build plate

  • Supports: Check the sliced preview and add supports only where necessary

Usage

Designed for organizing and air-drying:

  • Chopsticks

  • Spoons

  • Forks

  • Small kitchen utensils

Because the bottom is open, place the holder over a sink, draining board, or another water-safe surface when storing wet utensils.

Notes

This model has not yet been physically print-tested. Please check the sliced preview, particularly the honeycomb connections and bottom drainage openings, before printing.

The model is intended for lightweight kitchen utensils. Avoid heavy loads, high temperatures, and dishwasher cleaning unless your chosen material and print have been verified for those conditions.

Credits

This is a remix of the original Utensil Holder.

Credit to the original designer for the honeycomb-inspired design.

Tagi