Lightweight Honeycomb Utensil Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A lightweight remix of the original honeycomb utensil holder, resized to 100 × 150 mm with a redesigned honeycomb draina
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Lightweight Honeycomb Utensil Holder with Drainage Bottom
This is a compact, lightweight remix of the original honeycomb utensil holder, redesigned for improved drainage and everyday kitchen use.
The goal was to create a ventilated holder for chopsticks, spoons, and other utensils while reducing material usage and maintaining the original honeycomb aesthetic.
Key Features
Compact design: 100 mm diameter × 150 mm height.
Honeycomb side walls: Open structure for improved airflow and ventilation.
Honeycomb drainage bottom: Allows excess water to drain directly through the bottom.
Lightweight construction: Reduced side wall thickness to save filament.
Open-top design: Easy access to frequently used kitchen utensils.
Dimensions
Parameter | Specification |
|---|---|
Outer diameter | 100 mm |
Overall height | 150 mm |
Side wall | Lightweight honeycomb structure |
Bottom | Small-cell honeycomb drainage structure |
Estimated PETG material weight | Approximately 47.4 g |
The estimated weight is based on the model's solid volume and material density. Actual filament consumption may vary depending on slicer settings.
Suggested Print Settings
Material: PETG recommended; PLA may also be suitable
Layer height: 0.2 mm
Nozzle diameter: 0.4 mm
Wall loops: 3–4
Infill: 15–25%, if applicable
Print orientation: Upright, with the bottom on the build plate
Supports: Check the sliced preview and add supports only where necessary
Usage
Designed for organizing and air-drying:
Chopsticks
Spoons
Forks
Small kitchen utensils
Because the bottom is open, place the holder over a sink, draining board, or another water-safe surface when storing wet utensils.
Notes
This model has not yet been physically print-tested. Please check the sliced preview, particularly the honeycomb connections and bottom drainage openings, before printing.
The model is intended for lightweight kitchen utensils. Avoid heavy loads, high temperatures, and dishwasher cleaning unless your chosen material and print have been verified for those conditions.
Credits
This is a remix of the original Utensil Holder.
Credit to the original designer for the honeycomb-inspired design.