Earphones part for RP-HS34E
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is replacement for Panasonic RP-HS34E body.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is replacement for Panasonic RP-HS34E body.
Assembly: 1/ In disassembly the original, there is a one screw inside - pop out the speaker (do not pull too much - you can destroy the wafer coil like on the picture). The screw is inside under the glue. In the glue is knot from cable. Carefully remove glue and pull the knot with cable out. Then lose the screw (crosshead).
2/ Attached the printed body with srew to original part. Pop in the speaker back.
3/ Small cuted string from filament use for attaching the cable in the slot. By lighter heat the filament on both side and smash it for example with blunt side of the knife.
4/ Heat the printed body and adjust the shape for your ear.
If you want to use it for different earphones, there is step model for your easy remixing.
For printing: 0.2 layer, do not forget to print second part mirrored ☺
Enjoy!
Category: Other