1 / 2
Nurofen 200 ml Syringe Clip Holder (Snap-On) — zdjęcie 1
1 / 2

Nurofen 200 ml Syringe Clip Holder (Snap-On)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A snap-on clip that keeps the dosing syringe attached to a Nurofen for Children 200 ml bottle

Ocena
0 / 5
Polubienia
9
Pobrania
50
Wydruki
0
Wyświetlenia
123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Medical Tools
Licencja
Creative Commons — Attribution

A snap-on clip that keeps the dosing syringe attached to a Nurofen for Children 200 ml bottle. One C-clip snaps onto the bottle neck from the side, so you don’t need to remove the cap or the tamper ring. A second C-clip holds the syringe upright next to the bottle. Both snap on and off by hand.

Fits

  • Nurofen for Children 200 ml bottle (24.7 mm neck)

  • 11.1 mm oral dosing syringe

How to use

  1. Hold the clip with the flat side facing up and push the large opening sideways onto the bottle neck until it clicks.

  2. Push the syringe sideways into the small clip until it clicks.

Print settings

  • Orientation: as exported, flat face on the bed. No supports needed.

  • Material: PETG strongly recommended, because the clips need to flex. PLA may crack.

  • Layer height: 0.2 mm

  • Perimeters: 3

  • Infill: 20%

  • Brim: not needed

  • Print time: about 25 minutes on a Prusa MINI+

Customizing (parametric OpenSCAD file included)

  • neck_d, syringe_d, body_d: your measurements

  • syringe_fit: syringe grip. Use a more negative value for a tighter hold (default −0.2).

  • neck_open / syringe_open: clip opening as a fraction of the diameter. Lower values snap on harder and hold tighter (default 0.80).

  • tube_h: height of the syringe clip (default 30 mm)