Nurofen 200 ml Syringe Clip Holder (Snap-On)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A snap-on clip that keeps the dosing syringe attached to a Nurofen for Children 200 ml bottle
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 50
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution
A snap-on clip that keeps the dosing syringe attached to a Nurofen for Children 200 ml bottle. One C-clip snaps onto the bottle neck from the side, so you don’t need to remove the cap or the tamper ring. A second C-clip holds the syringe upright next to the bottle. Both snap on and off by hand.
Fits
Nurofen for Children 200 ml bottle (24.7 mm neck)
11.1 mm oral dosing syringe
How to use
Hold the clip with the flat side facing up and push the large opening sideways onto the bottle neck until it clicks.
Push the syringe sideways into the small clip until it clicks.
Print settings
Orientation: as exported, flat face on the bed. No supports needed.
Material: PETG strongly recommended, because the clips need to flex. PLA may crack.
Layer height: 0.2 mm
Perimeters: 3
Infill: 20%
Brim: not needed
Print time: about 25 minutes on a Prusa MINI+
Customizing (parametric OpenSCAD file included)
neck_d,syringe_d,body_d: your measurementssyringe_fit: syringe grip. Use a more negative value for a tighter hold (default −0.2).neck_open/syringe_open: clip opening as a fraction of the diameter. Lower values snap on harder and hold tighter (default 0.80).tube_h: height of the syringe clip (default 30 mm)
