1 / 2
Baratza Encore ESP Self-Holding Funnel for illy X1 (47.5 mm) – Remix — zdjęcie 1
1 / 2

Baratza Encore ESP Self-Holding Funnel for illy X1 (47.5 mm) – Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Self-holding funnel for Baratza Encore ESP and illy X1 (47.5 mm), with integrated mounting wedges. Classic version inclu

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
18
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

This is a remix of the Breville 54mm Baratza Encore Funnel, redesigned for the illy X1 Anniversary portafilter (47.5 mm) and enhanced with an integrated self-holding mounting system.

The main improvement is simple: the funnel stays inside the Baratza Encore ESP when you remove the portafilter!

No additional clips, screws, glue or modifications to the grinder are required.

Features

  • Self-holding design: Integrated side wedges provide a friction fit inside the grinder.

  • Hands-free convenience: The funnel stays in place while inserting or removing the portafilter.

  • Precise fit: Designed for the illy X1 Anniversary portafilter with a 47.5 mm inner diameter.

  • Clean coffee transfer: The original funnel geometry helps guide ground coffee directly into the portafilter.

  • No modifications required: Removable design without permanently modifying the grinder.

  • Easy to print: Single-piece design without additional components.

Two Versions Included

Self-Holding Funnel (Recommended)

The improved version with integrated mounting wedges. Designed to remain installed inside the Baratza Encore ESP.

Classic Funnel

The original remix without mounting wedges. Simply place it on the portafilter and remove it together with the portafilter.

Both versions are included so you can choose whichever works best for your setup.

Compatibility

  • Grinder: Baratza Encore ESP

  • Portafilter: illy X1 Anniversary

  • Portafilter inner diameter: 47.5 mm

  • Mounting width (self-holding): 92 mm

Designed, printed and fit-tested with my own setup. Fit may vary depending on printer tolerances.

Recommended Print Settings

  • Material: PETG

  • Layer height: 0.20 mm

  • Perimeters: 4

  • Infill: 15% Gyroid

Credits

Full credit to the creator of the original Breville 54mm Baratza Encore Funnel for the excellent base design!

Remixed, refined and improved with a little help from ChatGPT. 🤖☕

Enjoy your espresso!

Tagi