Liczymy pasujące modele…
This is an accessory for your Baratza Encore. It fits snugly into the grind bucket area and allows you to lean the portafilter and grind directly onto it. It also has a little tray that catches (most) of the grinds that overflow, so that…
Baratza burr holder remixed from johnyz's design (https://www.thingiverse.com/thing:1731803) I've made some modifications to make it easier to print, and in the process of that redone the scad file to make it easier to modify. Changes to…
I was thrilled by Reven's Portafilter holder for Baratza Encore but I found my portafilter was too small, tweaked the design of the holder piece to fit it. Go get the other parts from their project!
Borrowed the idea and design from https://www.thingiverse.com/thing:3270320 but I couldn't make the switch stay in place very well so I designed an inner housing + lever that fits in place of the existing knob. This fits my Baratza Encore…
This is a minimalist single doser container with a plain dust cap. I don't want to hold n*hundred grams of coffee beans in the grinder so the original Baratza container was a bit overkill for me. That's why I have designed this minimalist…
The hopper can hold approximately 30-40g of coffee beans. The model is a multi-part so the dial marker can be printed in a different color. Some light sanding and glue might be required.
I really liked the idea of https://www.thingiverse.com/thing:3270320 but some time during 2020 Baratza updated the Encore. Among the little changes is a new wider button. So the lever needed a larger slot. Took the advantage to stamp a…
Increased the width 1mm overall for a more snug fit. Perfect fit that requires force to remove
This is not perfect, but works with my grinder for several months now. Print with supports. PETG is enough, PLA might work but I hadn't tried. The part doesn't come to contact with your beans, so I don't care too much about a food safe…
Single dose hopper for Baratza Encore or Baratza Encore ESP coffee grinder with Baratza logo lid that can be used to weight coffee beans. There are two versions of the hopper, one with and the other without bean catcher. The one with bean…
A small single dosing hopper for the Baratza Encore ESP. Most hoppers have no possillity for a bellow, so I designt this one to fit a bellows like that one from AliExpress Put the gasket from the grinder in the hopper first, than the…
My Baratza Encore ESP, purchased April 2025 in UK, had a different style on/off rotary handle, so this is a remix of previous versions to accommodate the larger dial. I've also increased the lever angle from 30 ° to 70 ° so it sits a…
Print fits and work great. I will propably make some other replacement/mods for Baratza encore esp. Recommended Printing Settings Layer Height: 0.16 mm Brim: Auto inner brim (8-10 mm) Walls: 3-4 (infill optional, 15-30%) Supports:…
Baratza Encore Coffee Grinder Base Plate in two pieces This base plate should help catch the ground coffee bits that fall out of the coffee grinder, and do a little bit to keep your countertop clean. When I pull the drawer out of my…
Coffee lovers, unite!
The Baratza Encore coffee grinder comes with a dosing cup that is intended for use with larger portafilters; I have a Delonghi Dedica with a 51mm portafilter, which is smaller than the dosing cup opening (meaning you cannot simply insert…
This is a printable single dose hopper for the Baratza Encore, Virtuoso+, Vario and Forte espresso grinders. It can be used with the provided lid or the bellows. The bellows, printed in a flexible filament like TPU, will help to blow the…
remix of the amazing arhodes9 model. I printed the cup with tree support straight up.
Same as this extender but with a different angle https://www.printables.com/model/45400-baratza-encore-lever-extension-new-version( This remix does not have the coffee bean on it)
This is a printable bellows for Baratza Single Dose Hopper SKU #6115. Print a durable flexible filament like TPU. As the printed layers may separate after a few months of printing, keep a few spares on hand! Print with the top flat side…
A friend's coffee grinder knob broke, so I modeled up a replacement that doesn't require any supports and results in a friction fit. If you chemically smooth it, be sure to tape off the bottom to prevent the shape of the core from being…
I remixed the existing model to attach the sides to the main body for easier use and less assembly. You need to print the grounds tray from the original model. I recommend also printing a funnel, although I haven't yet. I'm also not happy…
New and improved! I took one comment on my original remix of tommy's hopper to heart, but I didn't understand it back then. I revisited it after a year or so and have an updated design. I made the volume larger (ended up being about 25%…
Please note that the fit is tight as tolerances were kept to a minimum. The lip at the bottom of the chute where the ground are ejected below the burrs is a snag point. Push down on the guide rails in order to get the top edge of the…
A convenient lever for your Baratza Encore burr coffee grinder. Replaces existing switch cover. Print is two pieces, but only the Main Lever is required. The optional Finger Pad provides a wider place for your finger to press. This piece…
Single dosing hopper for the Baratza Vario or Forte that tries to reduce popcorning and has an integrated bellows that can also be used as a dosing and RDT cup. The bellows part needs to be printed in a flexible material like TPU. PLA is…
I wish I had coffee grinds filament for this one ... Baratza Vario is such a nice coffee grinder but the portaholder design is ... less than ideal: makes a mess everywhere, can't hold the portafilter by itself and breaks easily. I…
The portafilter holder is designed around the dimensions of the bucket supplied with the Encore grinder. The holder rails are sized for the Breville Dual Boiler 58mm Portafilter. Installation is as simple as sliding the holder assembly…
Print settings: 0.20mm layer PETG 100% infill (may be overkill, but it was a small part and wanted it to be strong) No need for supports. Fits like a glove. Step file included if for some reason a newer model is a different size (bought…
This is a single dose hopper for Baratza meant to fit the Vario and Forte although it should work for the encore and virtuoso. With the cap in place it should at most fit around a ~28g dose but this is really meant for a single espresso…
Bellows for Baratza Sette 270 coffee grinder to blow out remaining coffee. Bellows itself have to be printed with flexible filament like TPU. The top and bottom ring should be printed with something rigid like PLA. Then they can just be…
Model of the Main Drive Gear for Baratza Conical Burr Grinders such as the Encore. It's functionally identical to Baratza part 6091. Modeled in Fusion, using the “GF Gear Generator” plugin. I printed my test models in PLA, though I'd…
This is a single dose hopper for the Baratza Vario/Forte coffee grinders. It uses a rubber grinder bellows commonly available on AliExpress (with an aluminum lid) that performs very well to blow all the grinds out of the grind chamber. I…
I recently discovered that two of the tabs on the upper ring burr holder on my Baratza Encore grinder had snapped off, causing boulders even at fine grind settings. Found this model on thingiverse and printed it and found it completely…
Tested with the Baratza Sette 30 but will also work with the 270 and other Sette models. There are other designs on here that work but I did not enjoy their look. This one is flush fitting and unintrusive. Printing: Print it on the top…
Ring Burr Holder for the Baratza Encore ESP (Part# : SP0102053) I have tried a model someone else made, but the dimensions were inaccurate for the external tabs and it was incredibly thin bodied. So I designed this one from taking…
I used this model and modified it to accommodate the hopper that Baratza sells: https://www.baratza.com/en-us/product/white-single-dose-hopper-for-conical-burr-series-grinders-zga6116wht0zxx1 The model NEEDS to be scaled down to 97.8% in…
I was trying to tweak my Baratza Encore coffee grinder to make it better for espresso, and I tried the stepless mod for it. This made adjusting the grinder way too difficult and made it fall out of alignment during grinding, but I came…
Baratza Sette Series is a coffee bean grinder. It contains a cup, which I use for coffee tools e.g. brushes. The holder can be fitted on top. After printing i sanded the part and painted it. Though this is not neccessary.
A wrench to open the Baratza/Mahlkönig vario/forte grind Chamber.A wrench to open the Baratza/Mahlkönig vario/forte grind Chamber. Tested on my Vario with Forte grind chamber.
Overview If you've used a Baratza conical burr grinder for a while, then you'll be familiar with the sacrificial ring burr holder (part number SP0101174 ) cracking and needing replacement. It only costs $5 + shipping or $20 from a local…
Hey there! This holds the Gaggia RI9380/46 Classic Evo Pro, Portafilter into the Baratza Sette 30 Conical Burr Grinder. The latest version holes it up at a bit of an angle so its more level. Step Files included! Go forth.
important: 58mm holder is based on lelit58 2 ears portafilter. so, please check your portafilter dimensions, especially ears. feel free to contact me and I will publish .stl, especially for your parameters after modeling the holder for a…
Adapter for the Baratza Vario/Forte, to mount the DF-64 bellows to it. The bellows can be bought from ali, for example here . 3D printed TPU bellows always broke for me after a month, so I was looking at a more permanent solution. The…
I created this stand because I wanted to grind into a dosing cup while using the grind by weight feature of the baratza forte. I have not checked, but I would presume that this would fit a Vario W as well. The stand snaps nicely onto the…
Small opening funnel that fits inside the Baratza Encore ESP. Should also be compatible with the Encore. Inspiration taken from https://www.printables.com/model/958843-sage-breville-the-smart-grinder-pro-single-dose-ho. 3 Sizes are…
The cup included with the Baratza Encore ESP grinder can be a bit messy. There is a lot of space between the top of the cup and the chute where the grounds come out, and the chute is off center. The only thing holding the cup in is a thin…
This is a tilted base for the Baratza Vario/Forte/Mahlkönig Vario home grinder. The tilt angle of 20 degrees helps coffee fall out when single dosing. The cup tray is a separate part and is designed to take M3 threaded insterts, and is…
Simple funnel that I have designed for Baratza Sette 270 Wi coffee burr to be used with Delonghi Dedica portafilter. I am using aftermarket Dedica portafilter with naked basket. Keep that in mind when deciding to print it. I have used PLA…
Accent strip for Baratza Encore (ESP). Fits into the slot at the bottom of the grinder. Feel free to scale in Z axis for optimal fit. Print settings any material any layer height any nozzle size any infill no supports
I often use my Encore to grind coffee directly into a paper drip filter. Works great, but always get some grinds into the bottom of the grinder. I designed this tray to slip into the bottom and catch the loose grinds. Print Settings…
Tray for 58mm Blindshaker, so it stays in place and dose not vibrate away while grinding. My shaker has an extrusion at the bottom, so it sits centered on my 58mm portafilter. I use a 58,4mm OD cutout in my print so the Shaker can sit on…
Funnel for Baratza Encore ESP coffee grinder
Dose Riser for a Baratza Encore ESP that fits a 58mm Normcore Blind Shaker. Modified to accept a Normcore 58mm blind shaker and raised it up slightly higher to get closer to the chute.
I'm quite satisfied with my 3D-printed modification that enables me to utilize the Baratza Forte's scale alongside the Quickmill sieve ( you can find it here ). However, I've been pondering why Baratza's designers and engineers disable…
if you just want to use the scale of the Baratza Forte AP coffee grinder with your existing dose cup but you don't want to balance it on the scale mount without any further fixations This Modell is just a tray you can put on the scale…
I'm not sure if the new Baratza ESP dosing cup setup would fit my old Virtuoso, but it was out of stock and wouldn't fit my Breville portafilter anyway - so I bought a dosing cup from Crema coffee products and designed this to work with…
2/29 Update: Added a longer steeper version after some testing. The original version works fine but throws grounds a little and threatens to clog on me more than I'd like. Haven't tested this version yet, but I think it will work better.…
Short hopper for better under-cabinet clearance for all Baratza grinders except Sette. Has been tested on Encore and Vario. For grinders that are adjusted by twisting the hopper (all except Vario and Forte) the notches in the base may…
Dosing funnel for Breville 54mm portafilter and Baratza Encore grinder.
A replacement for the Baratza Encore grinder's on/off knob. Prints as two parts (without supports) assembled with two M3 screws.
Generic PETG used on my Bambu Lab A1 mini. Nozzle: 255C Bed Temp: 70C Tree supports manually drawn onto the lip of the overhang only. See 3mf file.
[German] Der Trichter fasst ca. 35g Bohnen. Ich habe das Design auf einfache Druckbarkeit optimiert, aber leider ist ein Druck ohne Support nicht möglich. Daher kann man entweder den Support im Slicer setzen oder die Datei…
I don't have a 3D printer myself! If you print this, please post a 'Make' with a photo. I'd love to see how it turned out!" The Baratza Encore Ring Burr Holder keeps breaking on my dads coffee grinder so I designed a replacement part for…
Here is my Design for a 50g Hopper for a Mahlkönig/Baratza Vario. The Lid and the LockingRing you can print without Supports. The Hopper by it self need some support. I have uploaded two Versions of the Hopper. The V10 Version fits…
Remix of the lid to accept a cheap Niche Zero bellows. At time of creation these were £3.50/€4/$5 + delivery on Ali Express. Search for niche zero bellows ( link ). See the screenshot of measurements from a listing if the link doesn't…
Version of mgx@mgx_48368's excellent portafilter holder for the Rocket R58
A simple replacement knob for the Baratza Encore coffee grinder. Fusion design files provided so it can be modified to fit other uses. Printing Print nearly solid. With minimal supports on the knob. Be sure to block supports on the inner…
This is a remix of the excellent models done by @carhodes & @johnP to fit an Acaia dosing cup. I have used rubber orings to hold the holder in place and stop movement.
Replacement paddle wheel (ejector wheel) compatible with the Baratza Encore grinder. This part sits in the grounds chute area and helps sweep/eject ground coffee consistently, reducing buildup and improving dosing flow. Ideal as a spare…
The Baratza forte ap coffee grinder comes with a scale/ weight function which is only available for the big collection container. It's a bit complicated to grind the coffee by the weight function into the huge collection container and…
I make some adjustments so it would fit the Vario+ model perfectly.
This is a funnel to keep the grinds from falling off the edges of the porta filter. made to snap fit for the Breville/Sage Dual Boiler porta filter (58mm). it fits most of the baskets including the precision VST baskets
This replaces the portafilter forks in a Baratza Forte or Vario. Since it holds the cup flush to the exit shoot, it makes minor mess and lets you easily transfer to your portafilter. This is designed to fit these style generic cups.
The funnel inside is meant to block some popcorning, but it will occasionally get jammed. If you print the puffer in TPU it will split along the layer lines eventually. I've found the elastic material PEBA lasts much longer.
Just a simple holder for a coffee dosing cup from Aliexpress links to the dosing cup, choose 58 (.com and .ru): https://www.aliexpress.com/item/1005005547561180.html https://aliexpress.ru/item/1005003137249184.html feel free to adapt the…
This adapter allows the Baratza Single Dose Hopper to use a rubber grinder bellows commonly available on AliExpress (with an aluminum lid). This performs very well to blow all the grinds out of the grind chamber after grinding beans.…
Upgraded gear knob for the Baratza Encore coffee grinder
This is a single-dose blow hopper for Baratza Sette 270. The bellow is from Aliexpress, originally it is for Eureka Mignon https://www.aliexpress.com/item/1005004714390598.html you can buy any other bellow, and tune the size on Sketch4 in…
This will work with Lucca Mini 53mm basket.
Modification Summary: Increased the size of the opening where the hopper and burr holder mate (v4.2 and v6.1) Filled in gaps to make a solid continuous wall (v4.2 and v6.1) Changed retention shelf (v6.1) design I could not get my hopper…
After the original plastic part failed (see photo of the gray ring), I needed a replacement. This part isn't an exact match, but does the job. Steps: Print part, using supports as required and 100% infill. I used PETG. Use soldering iron…
This is a remix / addon for the https://www.printables.com/de/prints/77243-portafilter-cup-for-shake-distribution made by https://www.printables.com/de/social/96643-hairing. I made this to directly grinde into the “Portafilter Cup” from a…
Baratza sette is pretty messy when grinding into the stock bin or direct to a portafilter. This uses a little cup which can directly dump the ground coffee into a 58mm portafilter. This is the cup I remixed it to fit. It might fit others.…
Design intent Could not find a single dose hopper with bellows at a decent price on the market for the Baratza Vario plus grinder. They are quite expensive Wanted to keep a silicone bellows (and not a printed one, which won't last long)…
This is V1 of a grounds tray with a stand for a shaker.
Replacement Detent Pin for Baratza Encore coffee grinder (legacy model). This part is out of stock on Baratza's parts website. I'm unsure whether they stopped producing it because of the grinder's age. It goes under the grinder's…
Remix from the original model with a few modifications
A replacement knob for the Baratza Encore. Inspired by https://www.printables.com/model/166703-baratza-encore-lever
Baratza Encore ESP Dose Cup Riser for 54mm Blind Shaker by Normcore
directly use the 58mm sieve of your quickmill or other comparable porta filter with this Baratza Forte scale adapter to grind your coffee This remixed version has some improvements like e.g. haptic guide and a front indicator update…
Model snaps into place on Baratza Virtuoso and Virtuoso+ Grinder Fits flush and conforms exactly like standard catch tray that comes with the grinder. Funnels coffee perfectly into portafilter, and does not block LEDs Easy to install and…
if you prefer to directly grind the coffee into the sieve you can use this mount. works nice in combination with an espresso funnel prints without supports
Meant to be used with the base from https://www.printables.com/model/147530-baratza-vario-tilted-base-for-single-dosing/files
Basic scale using the most popular gram scale on amazon. https://www.amazon.com/gp/product/B06Y61YW7S/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1 This scale is inexpensive ~$10 or so and measures to 0.01 grams. Requires basic…
Rhys Burrows' remix of the Baratza Encore ESP dosing cup riser is a great fit for the machine. This model adds a couple of improvements: Receives the stock Baratza dosing cup base for easier cleaning and improved food safe contact…
My Baratza Virtuoso often made messes and left a lot of chaff, husks, etc after grinding. To mitigate this, I designed a small tray that can sit under it and catch any loose elements for easier clean up. It should work for many Baratza…
Ergonomic funnel to adapt the Vario for the dosing cup from Flair.
If you broke off the black button on your safety switch, I created a plug to disable the switch and keep grinding. Note: when I say broke off, it completely came out, leaving a void to allow me to stick this in there. If yours is half…
Mat for the portafilter attachment of the Baratza Vario+ coffee grinder to catch any grinds that escape. The mat loosely attaches to the portfilter attachment with two small tabs at the back corners that are pushed into the gap between…
