1 / 2
Bellows (Blasebalg) for Baratza Sette 270 coffee grinder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bellows (Blasebalg) for Baratza Sette 270 coffee grinder to blow out remaining coffee
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 609
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (1)Kolekcje (11)Powiązane
Bellows for Baratza Sette 270 coffee grinder to blow out remaining coffee. Bellows itself have to be printed with flexible filament like TPU. The top and bottom ring should be printed with something rigid like PLA. Then they can just be slipped on like a bike tire.
IMPORTANT: Top and bottom rings + middle part are all contained in one file in the assembled position! For printing you have to place them separately on the bed.
Recommended printing settings:
Mid part:
- Filament: TPU
- Layer height: 0.2mm
- Supports: No
Top and bottom:
- Filament: PLA
- Layer height: 0.15mm
- Supports: No