Cable Guide for 10x 6mm cables for Simrig - Inverted - MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inverted chequered flag cable guide for 10x 6 mm power and encoder cables on a sim racing motion rig.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Inverted version of my chequered flag cable guide, for managing 10 cables of 6 mm on a sim racing motion rig. It guides the power and encoder cables from the drives to the servo motors and keeps them neatly side by side.
The chequered flag colours are swapped compared with the original: red cells and black squares, with a 5 mm black border on the left and right ends. Made for dual colour printing with a Prusa MMU3.
Size
100 x 50 x 10.8 mm. The chequered flag is two layers high at a 0.4 mm layer height.
Printing
Print with the flag face down on the print bed. Use two filaments (MMU): black for the base and squares, red for the cells. The files are included as three STL parts that line up with each other (base, squares and cells) plus a 3MF project with the extruders already assigned. Load the STLs together as one object with multiple parts in your slicer, or open the 3MF.
If you build one, please post a make!