1 / 8
Chandelier hanging cage for the LG FAS163F speaker – swivel hanger, aims in 15° clicks — zdjęcie 1
1 / 8

Chandelier hanging cage for the LG FAS163F speaker – swivel hanger, aims in 15° clicks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

made for a friend to hang up the speakers, Chandelier hanging cage for the LG FAS163F speaker

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
1
Wyświetlenia
11
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Public Domain

Chandelier hanging cage for the LG FAS163F speaker – swivel hanger, aims in 15° clicks

Summary

Hang an LG FAS163F speaker from one ceiling hook: a printed cage plus a wrought-iron-style chandelier hanger that turns in 15° clicks to aim the speaker.

Description

What it is

A two-part hanging mount for the LG FAS163F speaker (the speaker of the LG FA163 micro system, 129 × 297 × 250 mm, 3.6 kg):

The cage holds the speaker on a ledge with a removable front lip, so you can slide the speaker in and out while it hangs. Both side faces stay open for the speaker’s side-firing woofer, so the same cage fits the left and the right speaker. Four upright ears on top take the cords.

The chandelier hanger hangs from one ceiling hook. Four S-scroll arms, like a wrought-iron chandelier, carry the cords from candle stems that sit straight above the ears. The arms turn on a printed axle under a fixed head and click into place every 15°, so you can aim the speaker at your listening spot. Cord sliders on each cord set height, level and tilt.

Everything prints without supports. Parts are already laid out in print orientation.

Sizes

Cage outside: 173 × 294 × 359 mm (to the tops of the ears). Inside: 133 × 254 × 300 mm.

Hanger: 187 × 308 × 164 mm (arm span × arm span × height, head included).

The gap between cage and hanger is up to you (cord length). In my renders it is about 18 cm.

Parts per speaker (file – how many – size)

Cage:

cage_tray_front – 1 – 173 × 159 × 92 mm

cage_tray_back – 1 – 173 × 159 × 92 mm

cage_top_half_x2 – 2 – 173 × 159 × 51 mm (front and back are the same part, turned round)

cage_post_x4 – 4 – 12 × 12 × 258 mm, lies on the bed diagonal. Or print cage_posts_4_on_one_plate (225 × 225 mm) for all four at once

cage_front_lip – 1 – 132 × 14 × 17 mm

cage_pin_20mm_x12 – 12 – snap pins for the corner sockets and the tray joints

cage_pin_12mm_x4 – 4 – snap pins for the top ring joints. Or print cage_pins_all_on_one_plate: all 16 pins plus 2 spares of each

cage_seat_pad_TPU_x2 – 2 – optional, 129 × 125 × 1.5 mm TPU pad: exactly the ledges and slats the speaker sits on, for grip, damping and to protect the speaker’s finish (two identical halves, turn one round)

Hanger:

hanger_arm_x4 – 4 – 148 × 86 × 12 mm

hanger_bobeche_x4 – 4 – Ø35 × 5 mm flower dish

hanger_arm_plate – 1 – Ø80 × 16 mm

hanger_splice_disc – 1 – Ø68 × 6 mm

hanger_collar – 1 – Ø68 × 15 mm (the 24 click notches)

hanger_head – 1 – 76 × 76 × 92 mm (hook loop, spring arm, nut window)

hanger_axle – 1 – Ø44 × 61 mm

hanger_cord_slider_x4 – 4 – 44 × 16 × 6 mm

hanger_pin_28mm_x4 – 4 – snap pins that lock the arms in

Printing

Bed: needs 250 × 250 mm. The 258 mm posts lie on the diagonal; they are already turned 45°, so don’t let the slicer auto-rotate them.

Material: PLA+ (I used SUNLU PLA+), 0.4 mm nozzle, 220–230 °C, bed 55–60 °C. About 950 g per speaker (cage ~570 g, hanger ~380 g).

No supports anywhere. Use an outer-only brim; an inner brim would fill the pin holes and slots.

Cage parts: 0.24 mm layers, 6 walls, 5 top / 5 bottom layers, 20 % infill.

Pins: print them lying flat as exported, solid. They flex within the layers, which is the strong way.

Hanger parts: 0.24 mm layers, 6 walls, 6 top / 6 bottom, 40 % gyroid.

Arms: 8 walls. They print lying on their side, so the load runs along the print lines. Two arms fit on one bed.

Head and axle: 0.20 mm layers and slower outer walls (~80 mm/s) for a clean click bump, cone seat and hex pocket. On the head, set elephant-foot compensation to ~0.2 mm, so the 1 mm spring-arm slot on the first layers stays open.

Seat pad: TPU 95A, printed flat, slowly (~20–30 mm/s) with little or no retraction, about 15 g per cage. On a printer with a multi-colour unit, feed TPU straight to the toolhead. With the pad, the speaker sits 1.5 mm higher, which still leaves 1.5 mm under the top ring.

The tray halves have tall corner towers. If your bed wobbles, slow the accelerations down once only the towers are printing.

Optional: I ran all parts through BrickLayers (GeekDetour, post-processing script) for stronger walls. It needs the Classic wall generator, inner/outer wall order and arc fitting off.

Brick-layer print plates (.gcode.3mf): 11 sliced files, one per print plate, for the Anycubic Kobra 3 with a 0.4 mm nozzle. Each one is the finished BrickLayers slice of that plate, made with the settings above. Open it in Anycubic Slicer Next: it opens in Preview, ready to print or send to the printer. These are finished slices, so they can’t be changed or sliced again. For another printer, slice the STLs with the settings above and run the G-code through BrickLayers (-startAtLayer 3 -extrusionMultiplier 1.05). Print the “print_twice” plates twice, and print the head and axle in PLA or PETG, not both:

cage_1_posts_x4_and_front_lip_PLA

cage_2_top_half_PLA_print_twice

cage_3_tray_back_PLA

cage_4_tray_front_PLA: slowed down for the tall corner towers (accelerations and speeds ×0.75, ×0.5 above 20 mm); the bed steps up from 60 to 65 °C over the first 10 mm for better grip

cage_5_snap_pins_PLA

hanger_1_arms_x2_PLA_print_twice

hanger_2_hub_parts_PLA

hanger_3_head_PLA or hanger_3_head_PETG

hanger_4_axle_PLA or hanger_4_axle_PETG

Hardware per speaker

1 × M6 × 30 screw (hex head or socket cap), 1 × M6 washer, 1 × M6 nyloc nut. Tools: 10 mm spanner, plus a 5 mm hex key for a socket cap.

4 mm paracord: 4 pieces of about 50–60 cm, longer for a bigger gap between cage and hanger.

A ceiling hook rated well above the speaker’s weight, plus a steel safety cable (recommended).

Optional: M4 bolts instead of the printed pins (the holes are 4.4 mm).

Assembly

Cage:

Join the tray front and back at the side joints with four 20 mm pins, heads on the inside.

Push the 4 posts into the tray corner sockets and pin them with 20 mm pins.

Join the two top halves with the four 12 mm pins, lower the ring onto the posts, and pin the top sockets with 20 mm pins.

Pins go in with their flats facing sideways; the split tip clicks past the far face. Pinch it with pliers to take a pin out.

Hanger:

Splice disc down, arm plate on top. Slide each arm’s foot into a slot, scroll curl underneath and stem up. Put the collar on top with its holes over the arms’ pin holes, then push the four 28 mm pins up from below through disc, arm and collar.

Slide a bobèche onto each stem, petal rim up, until it sits on the knob.

Push the axle up through the middle from below. Put the head on top: its cone takes the axle, and the click bump drops into a notch.

Put the screw up through the axle from below (a hex head drops into its pocket). Fit the washer and nyloc through the side window and tighten snug with the spanner. Head and axle are now one fixed part, and the arms turn around it.

Hang and aim:

Hang the head’s loop on the ceiling hook, with the safety cable as a backup.

Each cord: tie it to an ear and go up through the end hole of a slider. Go up through one bobèche hole, over the notch on top of the stem, and down through the other bobèche hole. Come back down through the slider’s other two holes and finish with a stopper knot. Slide the sliders to set the height and level. Shorten the two back cords to tilt the speaker towards you.

Optional: lay the two seat pad halves on the tray floor, ramped edges to the front and back. Lift off the front lip, slide the speaker in (it rides up the ramp onto the pad) and drop the lip back on.

To aim: hold the head and turn the cage. It clicks every 15°.

Good to know

Rough hand estimate: about 45 N (4.5 kg) hangs on the hook per speaker, and the printed parts see only a few MPa. Still, use a safety cable for anything hanging over people.

PLA+ softens from about 55 °C. Keep it away from hot lamps, heaters and direct sun through a window.

If the snap pins are too tight or too loose on your printer, M4 bolts fit the same holes. A drop of CA glue under a pin head makes it permanent.

Tagi