1 / 3
Key fob battery clip for Toyota Camry, Corolla, and Tacoma (HYQ12BDM) — zdjęcie 1
1 / 3

Key fob battery clip for Toyota Camry, Corolla, and Tacoma (HYQ12BDM)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fixes broken battery clip for Toyota model HYQ12BDM key fob (2012-2017 Camry, 2014-2018 Corolla, 2016-2018 Tacoma)

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
50
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

Did you break the battery clips on your Toyota HYQ12BDM key fob, making the battery pop out and rendering the key fob buttons useless? Don't spend hundreds at the dealership getting a new key, print this part in five minutes! This little piece applies the appropriate tension downward on the battery, allowing it to stay in place and provide power to the buttons. Requires no modification to the key fob. The four-button Toyota HYQ12BDM key fob is standard on the following Toyota vehicles:

  • 2012 Camry

  • 2013 Camry

  • 2014 Camry

  • 2015 Camry

  • 2016 Camry

  • 2017 Camry

  • 2014 Corolla

  • 2015 Corolla

  • 2016 Corolla

  • 2017 Corolla

  • 2018 Corolla

  • 2016 Tacoma

  • 2017 Tacoma

  • 2018 Tacoma

Installation instructions:

  1. Open the key fob (preferably face down so you don't lose the buttons) 

  2. Remove the black case that contains the buttons and the battery tray. You may discard the black case

  3. Insert the battery, placing pressure on it to keep it seated in the battery tray

  4. While keeping pressure on the battery, press the piece into the holes on the battery tray as pictured

  5. Place the battery tray back into the main key fob, ensuring that the buttons are in place before you close it

  6. Snap the back cover on and test your key fob

Original print specs:

Overture brand PLA using an Ender 3 v2 printer... So if mine can do it, yours can too. 80% infill, 60 degree bed temp, 200 degree nozzle temp. No supports or adhesion needed if printed flat on its back. Batch of 3 clips printed in about 7 minutes. Install took about 3 minutes.

Tagi