Nerf Rival Mini Target
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable self-righting target
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to resemble the original but at a smaller scale for a better test of accuracy.
Printing Info
Top/Bottom Thickness : 2mm
Infill : 15% Gyroid
Walls : 3
*You can increase the settings for higher strength but it will be harder to counter balance. These settings are plenty strong for most dart blasters*
Assembly Tips
You will need to fill the counter weight. Just about anything that will fit like small rocks, sand or old hardware will work. There is a funnel included in the files to help with this step.
Also included is an elastic version of the counter weight that works with 4mm elastic instead. I highly recommend the non-elastic version for the satisfying swinging motion.
The rest of the assembly should be straight forward by referencing the photos but if you have any questions or need a model adjusted, please private message me here on printables!
File Nomenclature
Support - Models marked with a (S) in the file name require support.
- Ex. MiniRival_(S)LeftLeg
Quantity - The quantity number for every piece can be found at the end of the file name. (Files not marked with a number should only be printed once)
-Ex. MiniRival_CrossBarPin4
Filament
Elegoo PLA Plus (Black and Orange)
Elegoo PLA Basic (Apple Green)
