Dickson T2 QCTP Dial guage tool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dial guage tool holder for a Dickson quick change tool posts - to suit tool holders 98mm lng
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
The dial guage tool holders I found for the Dickson quick change tool posts for the lathe were all for the smaller size ones for Myford sized lathes -about 73mm long. The tool holders for mine are 98mm long with larger spacing.
You will need a M6x 25mm bolt. The thread is printed in, but run a tap through the hole. The distance from the DTI base to the bolt hole is 10.25mm approx - they vary between brands. This one I have used was Aliexpress' or Temu's finest.
The Fusion 3D file is attached for anyone needing to change anything or improve it.
Printed in PETG.