Dickson T2 QCTP Dial guage tool holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dial guage tool holder for a Dickson quick change tool posts - to suit tool holders 98mm lng
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
The dial guage tool holders I found for the Dickson quick change tool posts for the lathe were all for the smaller size ones for Myford sized lathes -about 73mm long. The tool holders for mine are 98mm long with larger spacing.
You will need a M6x 25mm bolt. The thread is printed in, but run a tap through the hole. The distance from the DTI base to the bolt hole is 10.25mm approx - they vary between brands. This one I have used was Aliexpress' or Temu's finest.
The Fusion 3D file is attached for anyone needing to change anything or improve it.
Printed in PETG.