275 Printable Standoffs + M2–M6 Box with 8 Sorting Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standoff organizer box with 8 sorting bins (M2–M6) + 275 printable standoffs and spacers in 8 types, 5–25 mm.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
A box with 8 removable bins, one for each standoff type. Every bin has 6 compartments: M2 · M2.5 · M3 · M4 · M5 · M6. The lid has an engraved title. The set also includes 275 printable standoffs and spacers in lengths from 5 to 25 mm.
Standoff types
ROUND SPACER – clearance hole
HEX SPACER – clearance hole
HEX STANDOFF F-F – pilot hole for a tap or self-threading screw
HEX INSERT STANDOFF – holes for heat-set inserts
NUT TRAP STANDOFF – captive hex nut
FLANGED SPACER – shoulder / top hat
PCB SNAP-IN SUPPORT – snaps into a PCB hole, screws in from below
TAPE-MOUNT STANDOFF – wide base for double-sided tape
Lengths: 5 · 8 · 10 · 15 · 20 · 25 mm. Insert and nut trap types start at the shortest length that fits the insert or nut.
Printing
PLA or PETG, 0.2 mm layers, 15 % infill, no supports. Standoffs print upright as supplied.
Use PETG for the snap-in supports. The M2 snap-in is delicate.
The lid is already oriented face-down. A separate text inlay is included for two-colour printing.
Optional colour labels on the bins: add M600 at 1.2 mm and 24.0 mm.
Insert holes are sized for common heat-set inserts (e.g. M3 → 4.0 mm). Check them against your inserts.
Designed & built by Ing. TULák
GitHub: https://github.com/davidvancl
Printed it? Share a Make! Questions or ideas? Drop them in the comments.
Thanks for printing – may your PCBs always stand tall!