Kabeldurchführung / Cable Cland for Solar Roof / Schutzrohr Fränkische
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable Cland for Braas Harzer Pfanne. Strain Relief to Fränkische Cable Duct. For 3 cables for solar roof cabling.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a cable entry for solar panels for Braas Harzer Pfanne. It can fit 6mm2 solar cables in the left and right channel. The channel in the center is slightly bigger so you can fit up to a 10mm2 cable (like for earthing).
The 3 channels are guided internally to fit perfect the Fränkische (25mm) protective tube. This helped me to mount the entry on the roof and later to push all 3 cables simultaneously into the channels. Worked like it should. :) Use a zip tie to hold the protective tube in place.
I added a second version with a flat surface for other roof tiles.
Print without supports with the flat side down.