1 / 4
Coffin with Sitting-Up Skeleton (Halloween Mechanical Animatronic, OpenSCAD) — zdjęcie 1
1 / 4

Coffin with Sitting-Up Skeleton (Halloween Mechanical Animatronic, OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hexagonal coffin with a hinged lid and a skeleton that sits up, driven by a 5 V TT gear motor with a USB cable. Cam and

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
65
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Description

What it is
An animated Halloween decoration. A TT B-LA001 gear motor turns an eccentric cam, the cam lifts a pushrod, and the rod pushes a lever under the ribcage. The skeleton’s torso pivots around the pelvis up to about 55° and then drops back by gravity. The whole mechanism is hidden under the coffin floor. It runs from a USB charger or power bank with no extra electronics.

Size: about 190 × 80 × 96 mm, plus 3 mm for the lid.

Good to know

  • Keep the lid open while the motor runs: the skull rises above the rim. At rest with the lid closed, the skeleton fits inside.

  • At 5 V the motor runs at about 59 rpm, so roughly one sit-up per second. The datasheet allows 4–6 V.

  • Do not leave the motor powered while stalled: it heats up and can burn out. Use a power supply with protection or a fuse.

  • Contains small parts and pins: not a toy for small children.

Files: 9 STL files (one per part) plus the source scheletro_bara.scad. Changing part in the file exports each piece on its own.

Category, tags and license

  • Category: Games, or Hobby/Art & Design. Check whether the menu has an entry for Halloween or mechanisms.

  • Tags: halloween, skeleton, coffin, animated, mechanical, automaton, cam, tt motor, usb, openscad, parametric, desk decoration

  • License: your choice. CC BY or CC BY-NC-SA are the most common for open-source models.

  • Remix: no, this is an original project.

What you need (besides the printed parts)

  • 1 TT gear motor B-LA001, 5 V, with a 50 cm USB cable

  • 2 self-tapping M3 screws, about 25 mm, for the motor (check against the ones supplied with yours)

  • 4 M3 screws, 10–12 mm, for the front cover

  • 4 M3 screws, 12 mm, for the floor plate

  • 1.75 mm filament for 2 pins: about 27 mm for the lid, 18 mm for the pelvis

  • Cyanoacrylate glue to fix the legs to the floor plate

  • 5 V USB power supply or power bank

Recommended print settings

For a 0.4 mm nozzle, PLA (PETG is fine for the box, cam and rod). Minimum bed size is about 200 × 100 mm.

Part

Layer height

Walls

Infill

Supports

body (coffin)

0.2 mm

3

15%

Build plate only, for the hinge ears

lid (upside down)

0.2 mm

3

15%

No

floor (upside down)

0.2 mm

3

20%

No, use a brim against warping

box

0.2 mm

4

25%

No

cover

0.2 mm

3

20%

No

cam

0.12–0.16 mm

4

100%

No

rod

0.12–0.16 mm

4

100%

No, print upright

torso

0.16–0.2 mm

2–3

15%

Yes, tree supports (ribs, arms, skull)

legs

0.2 mm

3

20%

Few or none

Colors: bone/ivory for torso and legs, dark brown for coffin and lid. Floor plate, box and cam can be any color since they are hidden.

Print time and weight: to be filled in after printing. I have no real data to give you.

Assembly

  1. Mount the motor in the box with the 2 long screws, then slide the cam onto the D-shaped shaft.

  2. Close the box with the front cover and the 4 short screws, and route the cable through the slot.

  3. Place the box in its seat on the coffin floor. The cable exits through the hole in the foot-end wall.

  4. Screw the floor plate on top of the box.

  5. Drop the rod in from above through the hole until it rests on the cam.

  6. Glue the legs onto the floor plate.

  7. Insert the torso into the pelvis and lock it with the 18 mm pin.

  8. Mount the lid with the 27 mm pin.

OpenSCAD parameters to adjust

Parameter

What it does

part

Part to view or export (assembly for the assembled view and animation)

e and Rc

Cam stroke: larger values lift the torso higher, but make the box bigger

lever

Rod-to-hinge distance. Shorter gives a larger angle, but the rod pushes more sideways

lid_open

Lid opening in the assembled view

coffin_L

Coffin length. If you change it, check that the box and legs still fit

shaft_d, shaft_flat

D-shaft dimensions (5.4 and 3.7 mm). The model already adds 0.2 mm of clearance

Tolerances to check on the first print

  • If the cam is tight on the shaft, increase the clearance on the D-hole. If it is loose, reduce it.

  • The rod has 0.4 mm of clearance per side in the guide. If it jams, enlarge the hole: the slot_cut line uses rod_d + 0.8.

  • The 1.75 mm pins go into 2.1 mm holes. If a hinge is stiff, enlarge the hole to 2.2 mm.

  • If your motor differs slightly from the datasheet, correct m_lug and m_hole_off.

Tagi