Coffin with Sitting-Up Skeleton (Halloween Mechanical Animatronic, OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hexagonal coffin with a hinged lid and a skeleton that sits up, driven by a 5 V TT gear motor with a USB cable. Cam and
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Public Domain
Description
What it is
An animated Halloween decoration. A TT B-LA001 gear motor turns an eccentric cam, the cam lifts a pushrod, and the rod pushes a lever under the ribcage. The skeleton’s torso pivots around the pelvis up to about 55° and then drops back by gravity. The whole mechanism is hidden under the coffin floor. It runs from a USB charger or power bank with no extra electronics.
Size: about 190 × 80 × 96 mm, plus 3 mm for the lid.
Good to know
Keep the lid open while the motor runs: the skull rises above the rim. At rest with the lid closed, the skeleton fits inside.
At 5 V the motor runs at about 59 rpm, so roughly one sit-up per second. The datasheet allows 4–6 V.
Do not leave the motor powered while stalled: it heats up and can burn out. Use a power supply with protection or a fuse.
Contains small parts and pins: not a toy for small children.
Files: 9 STL files (one per part) plus the source scheletro_bara.scad. Changing part in the file exports each piece on its own.
Category, tags and license
Category: Games, or Hobby/Art & Design. Check whether the menu has an entry for Halloween or mechanisms.
Tags: halloween, skeleton, coffin, animated, mechanical, automaton, cam, tt motor, usb, openscad, parametric, desk decoration
License: your choice. CC BY or CC BY-NC-SA are the most common for open-source models.
Remix: no, this is an original project.
What you need (besides the printed parts)
1 TT gear motor B-LA001, 5 V, with a 50 cm USB cable
2 self-tapping M3 screws, about 25 mm, for the motor (check against the ones supplied with yours)
4 M3 screws, 10–12 mm, for the front cover
4 M3 screws, 12 mm, for the floor plate
1.75 mm filament for 2 pins: about 27 mm for the lid, 18 mm for the pelvis
Cyanoacrylate glue to fix the legs to the floor plate
5 V USB power supply or power bank
Recommended print settings
For a 0.4 mm nozzle, PLA (PETG is fine for the box, cam and rod). Minimum bed size is about 200 × 100 mm.
Part | Layer height | Walls | Infill | Supports |
|---|---|---|---|---|
| 0.2 mm | 3 | 15% | Build plate only, for the hinge ears |
| 0.2 mm | 3 | 15% | No |
| 0.2 mm | 3 | 20% | No, use a brim against warping |
| 0.2 mm | 4 | 25% | No |
| 0.2 mm | 3 | 20% | No |
| 0.12–0.16 mm | 4 | 100% | No |
| 0.12–0.16 mm | 4 | 100% | No, print upright |
| 0.16–0.2 mm | 2–3 | 15% | Yes, tree supports (ribs, arms, skull) |
| 0.2 mm | 3 | 20% | Few or none |
Colors: bone/ivory for torso and legs, dark brown for coffin and lid. Floor plate, box and cam can be any color since they are hidden.
Print time and weight: to be filled in after printing. I have no real data to give you.
Assembly
Mount the motor in the box with the 2 long screws, then slide the cam onto the D-shaped shaft.
Close the box with the front cover and the 4 short screws, and route the cable through the slot.
Place the box in its seat on the coffin floor. The cable exits through the hole in the foot-end wall.
Screw the floor plate on top of the box.
Drop the rod in from above through the hole until it rests on the cam.
Glue the legs onto the floor plate.
Insert the torso into the pelvis and lock it with the 18 mm pin.
Mount the lid with the 27 mm pin.
OpenSCAD parameters to adjust
Parameter | What it does |
|---|---|
| Part to view or export ( |
| Cam stroke: larger values lift the torso higher, but make the box bigger |
| Rod-to-hinge distance. Shorter gives a larger angle, but the rod pushes more sideways |
| Lid opening in the assembled view |
| Coffin length. If you change it, check that the box and legs still fit |
| D-shaft dimensions (5.4 and 3.7 mm). The model already adds 0.2 mm of clearance |
Tolerances to check on the first print
If the cam is tight on the shaft, increase the clearance on the D-hole. If it is loose, reduce it.
The rod has 0.4 mm of clearance per side in the guide. If it jams, enlarge the hole: the
slot_cutline usesrod_d + 0.8.The 1.75 mm pins go into 2.1 mm holes. If a hinge is stiff, enlarge the hole to 2.2 mm.
If your motor differs slightly from the datasheet, correct
m_lugandm_hole_off.