Exponential Screwdriver Holder – SKÅDIS T-Clip System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SKÅDIS screwdriver holder with T-clip mounting for 11–2 mm shafts and exponentially spaced holders.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I designed this SKÅDIS screwdriver holder to organize screwdrivers with shaft diameters ranging from 11 mm to 2 mm.
The holder uses an exponential arrangement of openings, providing larger spacing for larger screwdriver shafts while keeping the smaller openings closer together for smaller screwdrivers.
Support-free rear pegs: The rear pegs are designed to print without supports and help prevent undesired movement when mounted on the pegboard.
It uses a T-clip mounting system for attachment to an IKEA SKÅDIS pegboard.
The design was inspired by @Kai's Plier Holder. However, this model was independently designed around the dimensions and requirements of screwdriver storage.
Print Orientation and Parameters
The model should be printed as show in the pictures. Supports are only required inside the T-Clip mounting system, while the rear pegs can be printed without supports.
I printed my holder using 4 wall loops and 10% gyroid infill.
I recommend printing this model in PETG for improved durability and resistance to wear.
You can download the original T-Clip model from: